Microstructure and Tribological Properties of Laser Clad gamma/Cr7C3/Tic Composite Coatings on gamma-TiA1 Intermetallic Alloy

doi:10.1016/j.wear.2006.06.012

IMECH-IR > 力学所知识产出(1956-2008)

	Microstructure and Tribological Properties of Laser Clad gamma/Cr7C3/Tic Composite Coatings on gamma-TiA1 Intermetallic Alloy
	Liu XB(刘秀波); Wang HM; Liu, XB (reprint author), Chinese Acad Sci, Inst Mech, Lab Laser Intelligent Mfg, 15 Beisihuanxi Rd, Beijing 100080, Peoples R China.
发表期刊	Wear
	2007
卷号	262 期号:5-6 页码:514-521
ISSN	0043-1648
摘要	In order to improve the wear resistance of the gamma-TiAl intermetallic alloy, microstructure, room- and high-temperature (600 degrees C) wear behaviors of laser clad gamma/Cr7C3/TiC composite coatings with different constitution of NiCr-Cr3C2 precursor-mixed powders have been investigated by optical microscopy (OM), scanning electron microscopy (SEM), X-ray diffraction (XRD), energy-dispersive spectrometer (EDS), block-on-ring (room-temperature) and pin-on-disk (high-temperature) wear tests. The responding wear mechanisms are discussed in detail. Results show that microstructures of the laser clad composite coatings have non-equilibrium solidified microstructures consisting of primary hard Cr7C3 and TiC carbides and the inter-primary gamma/Cr7C3 eutectic matrix, about three to five times higher average microhardness compared with the TiAl alloy substrate. Higher wear resistance than the original TiAl alloy is achieved in the clad composite coatings under dry sliding wear conditions, which is closely related to the formation of non-equilibrium solidified reinforced Cr7C3 and TiC carbides and the positive contribution of the relatively ductile and tough gamma/Cr7C3 eutectics matrix and their stability under high-temperature exposure.
学科领域	力学
DOI	10.1016/j.wear.2006.06.012
收录类别	SCI
语种	英语
WOS记录号	WOS:000244411000003
WOS研究方向	Engineering ; Materials Science
WOS类目	Engineering, Mechanical ; Materials Science, Multidisciplinary
引用统计	被引频次：31[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://dspace.imech.ac.cn/handle/311007/16932
专题	力学所知识产出(1956-2008)
通讯作者	Liu, XB (reprint author), Chinese Acad Sci, Inst Mech, Lab Laser Intelligent Mfg, 15 Beisihuanxi Rd, Beijing 100080, Peoples R China.
推荐引用方式 GB/T 7714	Liu XB,Wang HM,Liu, XB . Microstructure and Tribological Properties of Laser Clad gamma/Cr7C3/Tic Composite Coatings on gamma-TiA1 Intermetallic Alloy[J]. Wear,2007,262,5-6,:514-521.
APA	刘秀波,Wang HM,&Liu, XB .(2007).Microstructure and Tribological Properties of Laser Clad gamma/Cr7C3/Tic Composite Coatings on gamma-TiA1 Intermetallic Alloy.Wear,262(5-6),514-521.
MLA	刘秀波,et al."Microstructure and Tribological Properties of Laser Clad gamma/Cr7C3/Tic Composite Coatings on gamma-TiA1 Intermetallic Alloy".Wear 262.5-6(2007):514-521.

条目包含的文件		下载所有文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
Microstructure and t（1384KB）			开放获取	--	浏览下载