Knowledge Management System of Institue of Mechanics, CAS
(Ti,Al)N Film On Normalized T8 Carbon Tool Steel Prepared By Pulsed High Energy Density Plasma Technique | |
Liu YF; Deng FP; Han JM; Xu XY; Yang SZ; Liu XB(刘秀波); Liu, YF (reprint author), Beijing Jiatong Univ, Inst Mat Sci & Engn, Beijing 100044, Peoples R China. | |
发表期刊 | Chinese Physics Letters |
2007 | |
页码 | 3469-3472 |
ISSN | 0256-307X |
摘要 | Under optimized operating parameters, a hard and wear resistant ( Ti,Al)N film is prepared on a normalized T8 carbon tool steel substrate by using pulsed high energy density plasma technique. Microstructure and composition of the film are analysed by x-ray diffraction, x-ray photoelectron spectroscopy, Auger electron spectroscopy and scanning electron microscopy. Hardness profile and tribological properties of the film are tested with nano-indenter and ring-on-ring wear tester, respectively. The tested results show that the microstructure of the film is dense and uniform and is mainly composed of ( Ti,Al)N and AlN hard phases. A wide transition interface exists between the film and the normalized T8 carbon tool steel substrate. Thickness of the film is about 1000 nm and mean hardness value of the film is about 26GPa. Under dry sliding wear test conditions, relative wear resistance of the ( Ti,Al)N film is approximately 9 times higher than that of the hardened T8 carbon tool steel reference sample. Meanwhile, the ( Ti,Al)N film has low and stable friction coefficient compared with the hardened T8 carbon tool steel reference sample. |
关键词 | Chemical-vapor-deposition Ticl4/alcl3/n-2/h-2/ar Gas-mixture (Ti1-xalx)n Coatings Nitride Films Behavior |
收录类别 | SCI ; EI ; CSCD |
语种 | 英语 |
WOS记录号 | WOS:000251774200049 |
关键词[WOS] | CHEMICAL-VAPOR-DEPOSITION ; TICL4/ALCL3/N-2/H-2/AR GAS-MIXTURE ; (TI1-XALX)N COATINGS ; NITRIDE FILMS ; BEHAVIOR |
WOS研究方向 | Physics |
WOS类目 | Physics, Multidisciplinary |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://dspace.imech.ac.cn/handle/311007/25512 |
专题 | 力学所知识产出(1956-2008) |
通讯作者 | Liu, YF (reprint author), Beijing Jiatong Univ, Inst Mat Sci & Engn, Beijing 100044, Peoples R China. |
推荐引用方式 GB/T 7714 | Liu YF,Deng FP,Han JM,et al. (Ti,Al)N Film On Normalized T8 Carbon Tool Steel Prepared By Pulsed High Energy Density Plasma Technique[J]. Chinese Physics Letters,2007:3469-3472. |
APA | Liu YF.,Deng FP.,Han JM.,Xu XY.,Yang SZ.,...&Liu, YF .(2007).(Ti,Al)N Film On Normalized T8 Carbon Tool Steel Prepared By Pulsed High Energy Density Plasma Technique.Chinese Physics Letters,3469-3472. |
MLA | Liu YF,et al."(Ti,Al)N Film On Normalized T8 Carbon Tool Steel Prepared By Pulsed High Energy Density Plasma Technique".Chinese Physics Letters (2007):3469-3472. |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
J2007-10.pdf(1308KB) | 开放获取 | -- | 浏览 下载 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论