Knowledge Management System of Institue of Mechanics, CAS
Non-Slipping Jkr Model For Transversely Isotropic Materials | |
Chen SH(陈少华); Yan C(闫聪); Soh A; Chen, S (reprint author), Chinese Acad Sci, Inst Mech, LNM, Beijing 100080, Peoples R China. | |
发表期刊 | International Journal of Solids and Structures |
2008 | |
页码 | 676-687 |
ISSN | 0020-7683 |
摘要 | A generalized plane strain JKR model is established for non-slipping adhesive contact between an elastic transversely isotropic cylinder and a dissimilar elastic transversely isotropic half plane, in which a pulling force acts on the cylinder with the pulling direction at an angle inclined to the contact interface. Full-coupled solutions are obtained through the Griffith energy balance between elastic and surface energies. The analysis shows that, for a special case, i.e., the direction of pulling normal to the contact interface, the full-coupled solution can be approximated by a non-oscillatory one, in which the critical pull-off force, pull-off contact half-width and adhesion strength can be expressed explicitly. For the other cases, i.e., the direction of pulling inclined to the contact interface, tangential tractions have significant effects on the pull-off process, it should be described by an exact full-coupled solution. The elastic anisotropy leads to an orientation-dependent pull-off force and adhesion strength. This study could not only supply an exact solution to the generalized JKR model of transversely isotropic materials, but also suggest a reversible adhesion sensor designed by transversely isotropic materials, such as PZT or fiber-reinforced materials with parallel fibers. (c) 2007 Elsevier Ltd. All rights reserved. |
关键词 | Adhesion Adhesive Contact Transversely Isotropic Material Jkr Model Biomimetic Fibrillar Interfaces Gecko Foot-hair Adhesive Contact Elastic Spheres Rigid Cylinder Dugdale Model Mechanics Surface Friction Energy |
DOI | 10.1016/j.ijsolstr.2007.08.013 |
收录类别 | SCI ; EI |
语种 | 英语 |
WOS记录号 | WOS:000251775000021 |
关键词[WOS] | BIOMIMETIC FIBRILLAR INTERFACES ; GECKO FOOT-HAIR ; ADHESIVE CONTACT ; ELASTIC SPHERES ; RIGID CYLINDER ; DUGDALE MODEL ; MECHANICS ; SURFACE ; FRICTION ; ENERGY |
WOS研究方向 | Mechanics |
WOS类目 | Mechanics |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://dspace.imech.ac.cn/handle/311007/26158 |
专题 | 力学所知识产出(1956-2008) |
通讯作者 | Chen, S (reprint author), Chinese Acad Sci, Inst Mech, LNM, Beijing 100080, Peoples R China. |
推荐引用方式 GB/T 7714 | Chen SH,Yan C,Soh A,et al. Non-Slipping Jkr Model For Transversely Isotropic Materials[J]. International Journal of Solids and Structures,2008:676-687. |
APA | 陈少华,闫聪,Soh A,&Chen, S .(2008).Non-Slipping Jkr Model For Transversely Isotropic Materials.International Journal of Solids and Structures,676-687. |
MLA | 陈少华,et al."Non-Slipping Jkr Model For Transversely Isotropic Materials".International Journal of Solids and Structures (2008):676-687. |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
Jp289.pdf(242KB) | 开放获取 | -- | 浏览 下载 |
个性服务 |
推荐该条目 |
保存到收藏夹 |
查看访问统计 |
导出为Endnote文件 |
Lanfanshu学术 |
Lanfanshu学术中相似的文章 |
[陈少华]的文章 |
[闫聪]的文章 |
[Soh A]的文章 |
百度学术 |
百度学术中相似的文章 |
[陈少华]的文章 |
[闫聪]的文章 |
[Soh A]的文章 |
必应学术 |
必应学术中相似的文章 |
[陈少华]的文章 |
[闫聪]的文章 |
[Soh A]的文章 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论