Peel test measurements and inverse analysis to determine the interfacial mechanical parameters for the metal film/ceramic system are performed, considering that there exist an epoxy interface layer between film and ceramic. In the present investigation, Al films with a series of thicknesses between 20 and 250 mu m and three peel angles of 90, 135 and 180 degrees are considered. A finite element model with the cohesive zone elements is used to simulate the peel test process. The finite element results are taken as the training data of a neural network in the inverse analysis. The interfacial cohesive energy and the separation strength can be determined based on the inverse analysis and peel experimental result. (C) 2008 Elsevier Ltd. All rights reserved.
Zhao HF,Chen M,Jin Y,et al. Determination Of Interfacial Properties Between Metal Film And Ceramic Substrate With An Adhesive Layer[J]. Materials & Design,2009,30,1,:154-159.
APA
赵海峰,Chen M,Jin Y,&Zhao HF.(2009).Determination Of Interfacial Properties Between Metal Film And Ceramic Substrate With An Adhesive Layer.Materials & Design,30(1),154-159.
MLA
赵海峰,et al."Determination Of Interfacial Properties Between Metal Film And Ceramic Substrate With An Adhesive Layer".Materials & Design 30.1(2009):154-159.
; Zhao HF
修改评论