Microstructural evolution and formation of nanocrystalline intermetallic compound during surface mechanical attrition treatment of cobalt

doi:10.1016/j.actamat.2007.06.030

IMECH-IR > 力学所知识产出(1956-2008)

	Microstructural evolution and formation of nanocrystalline intermetallic compound during surface mechanical attrition treatment of cobalt
	Wu XL(武晓雷); Tao NR; Wei QM; Jiang P; Lu J; Lu K; Wu, XL (reprint author), Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech, Beijing 100080, Peoples R China.
发表期刊	Acta Materialia
	2007
卷号	55 期号:17 页码:5768-5779
ISSN	1359-6454
摘要	Nanocrystalline intermetallic Co3Fe7 was produced on the surface of cobalt via surface mechanical attrition (SMA). Deformationinduced diffusion entailed the formation of a series of solid solutions. Phase transitions occurred depending on the atomic fraction of Fe in the surface solid solutions: from hexagonal close-packed (<4% Fe) to face-centered cubic (fcc) (4-11% Fe), and from fcc to body-centered cubic (>11% Fe). Nanoscale compositional probing suggested significantly higher Fe contents at grain boundaries and triple junctions than grain interiors. Short-circuit diffusion along grain boundaries and triple junctions dominate in the nanocrystalline intermetallic compound. Stacking faults contribute significantly to diffusion. Diffusion enhancement due to high-rate deformation in SMA was analyzed by regarding dislocations as solute-pumping channels, and the creation of excess vacancies. Non-equilibrium, atomic level alloying can then be ascribed to deformation-induced intermixing of constituent species. The formation mechanism of nanocrystalline intermetallic grains on the SMA surface can be thought of as a consequence of numerous nucleation events and limited growth. (C) 2007 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
关键词	Nanocrystalline Materials Diffusion Intermetallics Surface Mechanical Attrition Severe Plastic-deformation High-pressure Torsion Triple Junctions Nanostructured Materials Magnetic-properties Enhanced Diffusion Self-diffusion Pipe Diffusion Alloys Dislocations
DOI	10.1016/j.actamat.2007.06.030
收录类别	SCI ; EI
语种	英语
WOS记录号	WOS:000250355700010
关键词[WOS]	SEVERE PLASTIC-DEFORMATION ; HIGH-PRESSURE TORSION ; TRIPLE JUNCTIONS ; NANOSTRUCTURED MATERIALS ; MAGNETIC-PROPERTIES ; ENHANCED DIFFUSION ; SELF-DIFFUSION ; PIPE DIFFUSION ; ALLOYS ; DISLOCATIONS
WOS研究方向	Materials Science ; Metallurgy & Metallurgical Engineering
WOS类目	Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
引用统计	被引频次：59[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://dspace.imech.ac.cn/handle/311007/33893
专题	力学所知识产出(1956-2008)
通讯作者	Wu, XL (reprint author), Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech, Beijing 100080, Peoples R China.
推荐引用方式 GB/T 7714	Wu XL,Tao NR,Wei QM,et al. Microstructural evolution and formation of nanocrystalline intermetallic compound during surface mechanical attrition treatment of cobalt[J]. Acta Materialia,2007,55,17,:5768-5779.
APA	武晓雷.,Tao NR.,Wei QM.,Jiang P.,Lu J.,...&Wu, XL .(2007).Microstructural evolution and formation of nanocrystalline intermetallic compound during surface mechanical attrition treatment of cobalt.Acta Materialia,55(17),5768-5779.
MLA	武晓雷,et al."Microstructural evolution and formation of nanocrystalline intermetallic compound during surface mechanical attrition treatment of cobalt".Acta Materialia 55.17(2007):5768-5779.

条目包含的文件		下载所有文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
E150.pdf（1594KB）			开放获取	--	浏览下载