Knowledge Management System of Institue of Mechanics, CAS
低功率电弧加热发动机喷管扩张段内壁面温度测量 | |
其他题名 | Inner Nozzle Surface Temperature Measurement in a Low Power Arcjet Thruster |
黄河激; 潘文霞; 吴承康 | |
发表期刊 | 工程热物理学报 |
2011 | |
卷号 | 32期号:7页码:1185-1187 |
ISSN | 0253-231X |
摘要 | 采用滤光成像,摒弃电弧及羽流干扰,实验获得了采用纯氮、纯氢以及氢-氮混合气为推进剂时,低功率电弧加热发动机喷管内壁面的热辐射强度分布。通过辐射强度-温度标定以及图像分析,导出了相应的温度分布。实验结果表明,喷管扩张段内壁面温度最高处位于喉道出口附近。采用不同推进剂时,喷管内壁面温度分布情况有显著区别。 |
其他摘要 | Using an interference filter,thermal radiation images of the inner nozzle surface were obtained for a low power arcjet thruster.The interference filter was selected to cut off disturbance from arc and plume emissions when pure nitrogen,pure hydrogen and their mixtures were used as the propellant.Relationship between the radiation intensity and the temperature was calibrated and the corresponding temperature distribution was calculated based on the radiation intensity distribution obtained by image analysis.Results show that the highest temperature zone locates downstream close to the throat exit and the temperature distributions for different propellants vary a lot. |
关键词 | 电弧加热发动机 热辐射 喷管内壁 温度测量 |
学科领域 | 力学 |
URL | 查看原文 |
收录类别 | EI ; CSCD |
语种 | 中文 |
项目资助者 | 国家自然科学基金(No.50836007;No.10921062) |
CSCD记录号 | CSCD:4235743 |
课题组名称 | LHD应用等离子体力学(CPCR) |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://dspace.imech.ac.cn/handle/311007/44873 |
专题 | 等离子体与燃烧中心(2009-2011) |
通讯作者 | 黄河激 |
推荐引用方式 GB/T 7714 | 黄河激,潘文霞,吴承康. 低功率电弧加热发动机喷管扩张段内壁面温度测量[J]. 工程热物理学报,2011,32,7,:1185-1187. |
APA | 黄河激,潘文霞,&吴承康.(2011).低功率电弧加热发动机喷管扩张段内壁面温度测量.工程热物理学报,32(7),1185-1187. |
MLA | 黄河激,et al."低功率电弧加热发动机喷管扩张段内壁面温度测量".工程热物理学报 32.7(2011):1185-1187. |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
C2011J035.pdf(506KB) | 开放获取 | -- | 浏览 下载 |
个性服务 |
推荐该条目 |
保存到收藏夹 |
查看访问统计 |
导出为Endnote文件 |
Lanfanshu学术 |
Lanfanshu学术中相似的文章 |
[黄河激]的文章 |
[潘文霞]的文章 |
[吴承康]的文章 |
百度学术 |
百度学术中相似的文章 |
[黄河激]的文章 |
[潘文霞]的文章 |
[吴承康]的文章 |
必应学术 |
必应学术中相似的文章 |
[黄河激]的文章 |
[潘文霞]的文章 |
[吴承康]的文章 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论