IMECH-IR  > 水动力学与海洋工程重点实验室(2009-2011)
Volume flow rate measurement in vertical oil-in-water pipe flow using electrical impedance tomography and a local probe
Li H; Wang M; Wu YX(吴应湘); Lucas G
Source PublicationLi H.Volume flow rate measurement in vertical oil-in-water pipe flow using electrical impedance tomography and a local probe.2009
2009
Conference Name11th International Conference on multiphase flow in industrial plants
Conference Date7th-10th September 2008
Conference PlacePalermo, Sicily
Abstract

This paper presents the use of a high performance dual-plane electrical impedance tomography (EIT) system and a local dual-sensor conductance probe to measure the
vertical upward co-current oil-in-water pipe flows.
Experiments were carried on a flow loop with a transparent 2.5 m long, 80 mm inner diameter test section using kerosene and tap water. The flow conditions were
predominantly of the dispersed type with the non-slip oil volume fraction of 9.1%, 16.7% and 23.1% respectively, and with two groups of different mixture velocities. A sensitivity coefficient back-projection (SBP) algorithm was adopted to reconstruct the flow distributions from the EIT measurement data, and then the oil in-situ volume fraction was calculated based on Maxwell relationship with temperature compensation. The oil velocity distribution was obtained using a pixel to pixel cross correlation method. A local intrusive conductance probe was adopted to supply a reference measurement of oil volume fraction and velocity profiles. The oil volume fraction and velocity distributions from the two techniques were
compared, and good agreement was found. A further calculation of the water velocity distributions and flowrates was implemented through the drift flux approach, and the results were analysed and discussed.

Indexed By其他
Language英语
Document Type会议论文
Identifierhttp://dspace.imech.ac.cn/handle/311007/45668
Collection水动力学与海洋工程重点实验室(2009-2011)
Recommended Citation
GB/T 7714
Li H,Wang M,Wu YX,et al. Volume flow rate measurement in vertical oil-in-water pipe flow using electrical impedance tomography and a local probe[C]Li H.Volume flow rate measurement in vertical oil-in-water pipe flow using electrical impedance tomography and a local probe.2009,2009.
Files in This Item: Download All
File Name/Size DocType Version Access License
LHO0345.pdf(329KB) 开放获取LicenseView Download
Related Services
Recommend this item
Bookmark
Usage statistics
Export to Endnote
Google Scholar
Similar articles in Google Scholar
[Li H]'s Articles
[Wang M]'s Articles
[Wu YX(吴应湘)]'s Articles
Baidu academic
Similar articles in Baidu academic
[Li H]'s Articles
[Wang M]'s Articles
[Wu YX(吴应湘)]'s Articles
Bing Scholar
Similar articles in Bing Scholar
[Li H]'s Articles
[Wang M]'s Articles
[Wu YX(吴应湘)]'s Articles
Terms of Use
No data!
Social Bookmark/Share
File name: LHO0345.pdf
Format: Adobe PDF
This file does not support browsing at this time
 

Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.