Knowledge Management System of Institue of Mechanics, CAS
Characterisation of rock aggregate breakage properties using realistic texture-based modelling | |
Liu HY; Lindqvist PA; Akesson U; Kou SQ(寇绍全); Lindqvist JE; Liu, HY | |
发表期刊 | INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS |
2012-07-01 | |
卷号 | 36期号:10页码:1280-1302 |
ISSN | 0363-9061 |
摘要 | Realistic texture-based modelling methods, that is microstructural modelling and micromechanical modelling, are developed to simulate the rock aggregate breakage properties on the basis of the rock actual microstructure obtained using microscopic observations and image analysis. The breakage properties of three types of rocks, that is Avja, LEP and Vandle taken from three quarries in Sweden, in single aggregate breakage tests and in inter-aggregate breakage tests are then modelled using the proposed methods. The microstructural modelling directly integrates the microscopic observation, image analysis and numerical simulation together and provides a valuable tool to investigate the mechanical properties of rock aggregates on the basis of their microstructure properties. The micromechanical modelling takes the most important microstructure properties of rock aggregates into consideration and can model the major mechanical properties. Throughout this study, it is concluded that in general, the microstructure properties of rock aggregate work together to affect their mechanical properties, and it is difficult to correlate a single microstructure property with the mechanical properties of rock aggregates. In particular, for the three types of rock Avja, LEP and Vandle in this study, crack size distribution, grain size and grain perimeter (i.e. grain shape and spatial arrangement) show good correlations with the mechanical properties. The crack length and the grain size negatively affect the mechanical properties of Avja, LEP and Vandle, but the perimeter positively influences the mechanical properties. Besides, the modelled rock aggregate breakage properties in both single aggregate and inter-aggregate tests reveal that the aggregate microstructure, aggregate shape and loading conditions influence the breakage process of rock aggregate in service. For the rock aggregate with the same microstructure, the quadratic shape and good packing dramatically improve its mechanical properties. During services, the aggregate is easiest to be fragmented under point-to-point loading condition, and then in the sequence of multiple-point, point-to-plane and plane-to-plane loading conditions. |
关键词 | Microstructural Modelling Micromechanical Modelling Microscopic Observation Image Analysis Rock Breakage Rock Aggregate Part i Fracture Failure Compression Heterogeneity |
学科领域 | 岩体力学和土力学 |
URL | 查看原文 |
收录类别 | SCI ; EI |
语种 | 英语 |
WOS记录号 | WOS:000305680500003 |
项目资助者 | The experimental and numerical studies in this investigation were mainly completed at Lulea University of Technology in Sweden, and the analytical work was accomplished at University of Tasmania in Australia. The financial supports from the Geological Survey of Sweden (SGU) and the NARGS and IRGS grants at the University of Tasmania are greatly appreciated. Moreover, the authors would like to thank Lars Persson at SGU for supporting our research work, making valuable comments and suggestion and providing a number of literatures. Besides, we are in debt to Mattias Goransson at SGU for the rock sampling and Lars Jacobsson at Swedish National Testing and Research Institute (SP) for the mechanical tests. |
课题组名称 | 职能与支撑部门 |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://dspace.imech.ac.cn/handle/311007/46379 |
专题 | 职能与支撑部门 |
通讯作者 | Liu, HY |
推荐引用方式 GB/T 7714 | Liu HY,Lindqvist PA,Akesson U,et al. Characterisation of rock aggregate breakage properties using realistic texture-based modelling[J]. INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS,2012,36,10,:1280-1302. |
APA | Liu HY,Lindqvist PA,Akesson U,Kou SQ,Lindqvist JE,&Liu, HY.(2012).Characterisation of rock aggregate breakage properties using realistic texture-based modelling.INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS,36(10),1280-1302. |
MLA | Liu HY,et al."Characterisation of rock aggregate breakage properties using realistic texture-based modelling".INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS 36.10(2012):1280-1302. |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
SCI-J2012-032.pdf(1810KB) | 开放获取 | -- | 浏览 下载 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论