| Microstructural and mechanical characteristics of laser welding of Ti6Al4V and lead metal |
| Zhao SS(赵树森); Yu G(虞钢); He XL(何秀丽); Hu YW(胡耀武); Zhao, SS; Bldg 1,Room 425,A35 QingHua E Rd, Beijing 100083, Peoples R China.
|
发表期刊 | JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
|
| 2012-07-01
|
卷号 | 212期号:7页码:1520-1527 |
ISSN | 0924-0136
|
摘要 | Titanium alloy Ti6Al4V and lead metal were welded using a continuous wave Nd:YAG laser. The influences of laser power, scanning velocity, and laser beam offset on weld morphology were investigated. Microstructure, chemical composition and mechanical properties of the joints were evaluated. Experimental results showed that fusion weld formed at the upper part of the weld and brazing weld with solder of Pb formed at the lower part of the weld under appropriate process condition. Interfaces were formed between mixed fusion zone and liquid lead zone in molten pool during laser welding of Ti6Al4V and lead. Reasons for interface formation may be different driving force of various regions in molten pool, and the miscibility gap of Ti and Pb binary system. Ti-Pb intermetallic compound Ti4Pb was detected at the fusion weld zone, which made the microhardness of the weld seam was higher than that of the base materials. The strength of the joint was at least equal to or larger than that of lead base material. |
关键词 | Laser Welding
Welding Of Different Materials
Interfaces
Microstructure
Mechanical Properties
Ni Dissimilar Couple
Molten Pool
Titanium
Aluminum
|
学科领域 | 制造工艺力学
|
URL | 查看原文
|
收录类别 | SCI
; EI
|
语种 | 英语
|
WOS记录号 | WOS:000304020800009
|
项目资助者 | The research was sponsored by National Natural Science of China (Grant Nos. 10832011 and 10972222).
|
课题组名称 | MAM激光智能制造工艺力学
|
论文分区 | 二类/Q1
|
引用统计 |
|
文献类型 | 期刊论文
|
条目标识符 | http://dspace.imech.ac.cn/handle/311007/46622
|
专题 | 先进制造工艺力学实验室
|
通讯作者 | Zhao, SS; Bldg 1,Room 425,A35 QingHua E Rd, Beijing 100083, Peoples R China. |
推荐引用方式 GB/T 7714 |
Zhao SS,Yu G,He XL,et al. Microstructural and mechanical characteristics of laser welding of Ti6Al4V and lead metal[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2012,212,7,:1520-1527.
|
APA |
赵树森,虞钢,何秀丽,胡耀武,Zhao, SS,&Bldg 1,Room 425,A35 QingHua E Rd, Beijing 100083, Peoples R China..(2012).Microstructural and mechanical characteristics of laser welding of Ti6Al4V and lead metal.JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,212(7),1520-1527.
|
MLA |
赵树森,et al."Microstructural and mechanical characteristics of laser welding of Ti6Al4V and lead metal".JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 212.7(2012):1520-1527.
|
修改评论