Regardless of all kinds of different formulae used for the traction-separation relationship in cohesive zone modeling, the peak traction $\sigma_{ m}$ and the separation-to-failure $\delta_0$ (or equivalently the work-to-separation $\Gamma$) are the primary parameters which control the interfacial fracture behaviors. Experimentally, it is hard to determine those quantities, especially for $\delta_0$, which occurs in a very localized region with possibly complicated geometries by material failure. Based on the Dugdale model, we show that the separation-to-failure of an interface could be amplified by a factor of $L/r_{ p}$ in a typical peeling test, where $L$ is the beam length and $r_{ p}$ is the cohesive zone size. Such an amplifier makes $\delta_0$ feasible to be probed quantitatively from a simple peeling test. The method proposed here may be of importance to understanding interfacial fractures of layered structures, or in some nanoscale mechanical phenomena such as delamination of thin films and coatings.
Wei YJ. A Dugdale model based geometrical amplifier enables the measurement of separation-to-failure for a cohesive interface[J]. THEORETICAL & APPLIED MECHANICS LETTERS,2011,1,1,:011006.
APA
Wei YJ.(2011).A Dugdale model based geometrical amplifier enables the measurement of separation-to-failure for a cohesive interface.THEORETICAL & APPLIED MECHANICS LETTERS,1(1),011006.
MLA
Wei YJ."A Dugdale model based geometrical amplifier enables the measurement of separation-to-failure for a cohesive interface".THEORETICAL & APPLIED MECHANICS LETTERS 1.1(2011):011006.
修改评论