IMECH-IR  > 高温气体动力学国家重点实验室
基于实验设计方法的高超声速飞机前缘型线优化分析
Alternative TitleOPTIMIZATION AND ANALYSIS OF THE LEADING EDGE SHAPE FOR HYPERSONIC AIRPLANES BASED ON DOE METHODS1)
胡守超; 崔凯; 李广利; 肖尧; 司徒明
Source Publication力学学报
2016
Volume48Issue:2Pages:290-299
ISSN0459-1879
Abstract为探索前缘线变化对吸气式高超声速飞机气动性能的影响,基于一种旁侧进气布局翼身融合体构型,在飞行马赫数6,攻角4ffi和高度26 km的巡航飞行条件下,结合运用增量修正参数化设计方法、均匀实验设计方法和计算流体力学模拟,分析了飞行器前缘型线与其升阻力系数及纵向压心等性能参数间的关系.计算结果表明,前缘线形状对飞行器升阻力系数明显高于其对纵向压心影响,设计空间范围内升力系数变化约21.3%,阻力系数变化约31.8%,升阻比变化范围约10.63%,但相对压心变化范围仅为3.87%.在此基础上,通过对典型构型物面压力分布进行分析,发现前缘线形状适当弯曲可利用飞行器下表面侧壁压缩产生的高压气流,利用二者的耦合效应使飞行器获得额外的升力增量.
Other AbstractBy taking a Blend-Wing-Body configuration with dual flanking inlets layout as the baseline, an aerodynamic shape optimization study for the leading edge of the vehicle is carried out. An increment-based method is developed to parameterize the leading edge, and the uniform design method is taken as the optimization driver. Totally 31 configurations with different leading edge shapes are generated, and then the aerodynamic performance of all configurations are evaluated by computational fluid dynamic simulation in the cruising conditions of Mach 6, flight altitude 26 km, and flight angle of attack 4ffi. Numerical results show that the relative variations of the lift and the drag coefficients in whole design space are 21.3% and 31.8%, respectively. Consequently, the relative variation of the lift-to-drag ratio is about 10.63%. In contrast, the maximal value of the relative position transition for the longitudinal pressure center is only 3.87%. Besides, the results also indicate that there is a proportional relationship between the vertical project area and the lift or drag coefficients. Finally, the effect of the leading edge deformation on the aerodynamic characteristics is analyzed on the basis of the results, and some primary rules are concluded. A concave shape of the leading edge is benefit to the improvement of the lift-to-drag ratio, while a convex one leads to a large lift coefficient.
KeywordHypersonic Airplane Air-breathing Vehicle Shape Optimization Parameterization Uniform Design
Indexed ByEI ; CSCD
Language中文
WOS Keywordhypersonic airplane ; air-breathing vehicle ; shape optimization ; parameterization ; uniform design
Funding Organization国家自然科学基金资助项目
CSCD IDCSCD:5670483
DepartmentLHD气动布局优化与计算方法
Classification二类
RankingTrue
Citation statistics
Cited Times:3[CSCD]   [CSCD Record]
Document Type期刊论文
Identifierhttp://dspace.imech.ac.cn/handle/311007/59827
Collection高温气体动力学国家重点实验室
Recommended Citation
GB/T 7714
胡守超,崔凯,李广利,等. 基于实验设计方法的高超声速飞机前缘型线优化分析[J]. 力学学报,2016,48(2):290-299.
APA 胡守超,崔凯,李广利,肖尧,&司徒明.(2016).基于实验设计方法的高超声速飞机前缘型线优化分析.力学学报,48(2),290-299.
MLA 胡守超,et al."基于实验设计方法的高超声速飞机前缘型线优化分析".力学学报 48.2(2016):290-299.
Files in This Item: Download All
File Name/Size DocType Version Access License
a2016-220.pdf(1239KB)期刊论文作者接受稿开放获取CC BY-NC-SAView Download
Related Services
Recommend this item
Bookmark
Usage statistics
Export to Endnote
Google Scholar
Similar articles in Google Scholar
[胡守超]'s Articles
[崔凯]'s Articles
[李广利]'s Articles
Baidu academic
Similar articles in Baidu academic
[胡守超]'s Articles
[崔凯]'s Articles
[李广利]'s Articles
Bing Scholar
Similar articles in Bing Scholar
[胡守超]'s Articles
[崔凯]'s Articles
[李广利]'s Articles
Terms of Use
No data!
Social Bookmark/Share
File name: a2016-220.pdf
Format: Adobe PDF
All comments (0)
No comment.
 

Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.