| Crushing behavior of a thin-walled circular tube with internal gradient grooves fabricated by SLM 3D printing |
| Yang Z; Yu YY; Wei YP(魏延鹏); Huang CG(黄晨光); Wei, YP (reprint author), Chinese Acad Sci, Inst Mech, Key Lab Mech Fluid Solid Coupling Syst, Beijing 100190, Peoples R China.
|
发表期刊 | THIN-WALLED STRUCTURES
|
| 2017
|
卷号 | 111页码:1-8 |
ISSN | 0263-8231
|
摘要 | Selective laser melting (SLM) is a mature method in the fabrication of structures bearing static loading and small strains; however, structures experiencing large deformation under impact loading remains an issue. In this paper, the author fabricates a 316L stainless steel thin-walled circular tube with preset internal circumferential rectangular groove defects using the SLM method. MTS compression and Split Hopkinson Pressure Bar tests are performed to judge the material behavior of SLM printed 316L stainless steel, and Johnson-Cook constitutive model parameters are fitted from the results. The crushing behavior of the SLM printed tube is studied experimentally and numerically via the drop hammer test and the finite element analysis. There are two stages of the crushing process of the tube as the results show: the budding stage and the splitting stage. The internal grooves have effects on controlling the initial buckling position and fracture position during the buckling stage. The double buckling-splitting crushing mode in one simple structure, provides a new energy absorption approach for engineering application. |
DOI | 10.1016/j.tws.2016.11.004
|
URL | 查看原文
|
收录类别 | SCI
; EI
|
语种 | 英语
|
WOS记录号 | WOS:000393004100001
|
关键词[WOS] | Selective laser melting (SLM)
; 3D printing
; Thin-walled tube
; Internal defects
; Energy absorption
|
WOS研究方向 | Engineering
|
WOS类目 | Engineering, Civil
|
课题组名称 | LMFS冲击与耦合效应(LHO)
|
论文分区 | 二类
|
力学所作者排名 | 1
|
引用统计 |
|
文献类型 | 期刊论文
|
条目标识符 | http://dspace.imech.ac.cn/handle/311007/60101
|
专题 | 流固耦合系统力学重点实验室
|
通讯作者 | Wei, YP (reprint author), Chinese Acad Sci, Inst Mech, Key Lab Mech Fluid Solid Coupling Syst, Beijing 100190, Peoples R China. |
推荐引用方式 GB/T 7714 |
Yang Z,Yu YY,Wei YP,et al. Crushing behavior of a thin-walled circular tube with internal gradient grooves fabricated by SLM 3D printing[J]. THIN-WALLED STRUCTURES,2017,111:1-8.
|
APA |
Yang Z,Yu YY,魏延鹏,黄晨光,&Wei, YP .(2017).Crushing behavior of a thin-walled circular tube with internal gradient grooves fabricated by SLM 3D printing.THIN-WALLED STRUCTURES,111,1-8.
|
MLA |
Yang Z,et al."Crushing behavior of a thin-walled circular tube with internal gradient grooves fabricated by SLM 3D printing".THIN-WALLED STRUCTURES 111(2017):1-8.
|
修改评论