IMECH-IR  > 力学所知识产出(1956-2008)
Performance of supersonic model combustors with distributed injection of supercritical kerosene
Fan XJ(范学军); Yu G(俞刚); Li JG(李建国); Lu XN; Sung CJ
Source PublicationCollection of Technical Papers - 43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference
2007
Conference Name43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference
Conference DateJuly 8, 2007 - July 11, 2007
Conference PlaceCincinnati, OH, United states
AbstractSupersonic model combustors with two-staged injections of supercritical kerosene were experimentally investigated in both Mach 2.5 and 3.0 facilities with the stagnation temperatures of approximately 1750K. Supercritical kerosene at temperatures of approximately 760K and various pressures was prepared using a two-staged heater developed in Ref. 1 and injected at equivalence ratios of 0.98 to 1.46. Two pairs of integrated injector/flameholder cavity models in tandem were used to facilitate the fuel-air mixing and stabilize the combustion. Combustor performances with different fuel injection locations, injector numbers, combinations of injection stages, and combustor entry Mach numbers were investigated systematically and discussed based on the measured static pressure distributions and the specific thrust increments due to combustion. With two-staged fuel injections the overall performance of the combustors was shown to be improved and fuel injections at equivalence ratio higher than unity could be reached without combustor-inlet interaction. Reducing the number of injectors while increased its diameter was very effective to increase the pressure rise in the combustor with single-stage injections but had little effect on the combustor performance with two-staged fuel injections. Increasing the entry Mach number resulted in lower combustion levels, in particular, with fuel injections at locations close to the combustor exit but was balanced with two-staged fuel injections.
KeywordStagnation Temperatures Supercritical Kerosene Supersonic Model Combustors
ISBN1563479036
Indexed ByEI
Language英语
Document Type会议论文
Identifierhttp://dspace.imech.ac.cn/handle/311007/60307
Collection力学所知识产出(1956-2008)
Recommended Citation
GB/T 7714
Fan XJ,Yu G,Li JG,et al. Performance of supersonic model combustors with distributed injection of supercritical kerosene[C],2007.
Files in This Item: Download All
File Name/Size DocType Version Access License
CaEi074.pdf(423KB)会议论文 开放获取CC BY-NC-SAView Download
Related Services
Recommend this item
Bookmark
Usage statistics
Export to Endnote
Google Scholar
Similar articles in Google Scholar
[范学军]'s Articles
[俞刚]'s Articles
[李建国]'s Articles
Baidu academic
Similar articles in Baidu academic
[范学军]'s Articles
[俞刚]'s Articles
[李建国]'s Articles
Bing Scholar
Similar articles in Bing Scholar
[范学军]'s Articles
[俞刚]'s Articles
[李建国]'s Articles
Terms of Use
No data!
Social Bookmark/Share
File name: CaEi074.pdf
Format: Adobe PDF
All comments (0)
No comment.
 

Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.