Effect of laser remelting on microstructure and properties of WC reinforced Fe-based amorphous composite coatings by laser cladding | |
Zhou SF; Xu YB; Liao BQ; Sun YJ; Dai XQ; Yang JX; Li ZY(李正阳) | |
发表期刊 | OPTICS AND LASER TECHNOLOGY |
2018-07-01 | |
卷号 | 103页码:8-16 |
ISSN | 0030-3992 |
摘要 | The WC reinforced Fe-based amorphous composite coatings were prepared by laser cladding with rectangular spot. The effect of laser remelting on the microstructure and properties of composite coatings was investigated. The results showed that laser remelting can reduce the cracks and porosities of the cladding coating and improve its surface quality. Large amounts of crystalline phases were precipitated at the top of the cladding and remelting coatings. However, the microstructure at the top of the remelting coating was finer compared to that at the top of the cladding coating. With increasing distance from the surface of substrate, the amorphous phase appeared within the remelting coating and large amounts of carbides rich in Fe and Mo, Fe23B6, gamma-Fe and Cr-9.1.Si-0.9 Slag phases were also precipitated in the remelting coating. As a result, the corrosion resistance of the remelting coating was higher than that of the cladding coating. The microhardness of the remelting coating was approximately 1.13 times higher than that of the cladding coating. (C) 2018 Elsevier Ltd. All rights reserved. |
关键词 | Amorphous composite Laser cladding Microstructure Laser remelting Corrosion |
DOI | 10.1016/j.optlastec.2018.01.024 |
URL | 查看原文 |
收录类别 | SCI ; EI |
语种 | 英语 |
WOS记录号 | WOS:000427339000002 |
关键词[WOS] | BULK METALLIC-GLASS ; MELTED TI-6AL-4V ALLOY ; CORROSION BEHAVIOR ; MECHANICAL-PROPERTIES ; FORMING ABILITY ; NACL SOLUTION ; RESISTANCE ; NI ; ZR ; EVOLUTION |
WOS研究方向 | Optics ; Physics, Applied |
WOS类目 | Optics ; Physics |
项目资助者 | National Natural Science Foundation of China [50901040] ; Outstanding Youth Foundation of Jiangxi Province [20162BCB23039] |
论文分区 | 二类 |
力学所作者排名 | 1 |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://dspace.imech.ac.cn/handle/311007/77894 |
专题 | 先进制造工艺力学实验室 |
作者单位 | 1.Tianjin Polytech Univ, Laser Technol Inst, Tianjin 300387, Peoples R China 2.Beijing Univ Technol, Inst Laser Engn, Beijing 100124, Peoples R China 3.Chinese Acad Sci, Inst Mech, Beijing 10090, Peoples R China |
推荐引用方式 GB/T 7714 | Zhou SF,Xu YB,Liao BQ,et al. Effect of laser remelting on microstructure and properties of WC reinforced Fe-based amorphous composite coatings by laser cladding[J]. OPTICS AND LASER TECHNOLOGY,2018,103:8-16. |
APA | Zhou SF.,Xu YB.,Liao BQ.,Sun YJ.,Dai XQ.,...&李正阳.(2018).Effect of laser remelting on microstructure and properties of WC reinforced Fe-based amorphous composite coatings by laser cladding.OPTICS AND LASER TECHNOLOGY,103,8-16. |
MLA | Zhou SF,et al."Effect of laser remelting on microstructure and properties of WC reinforced Fe-based amorphous composite coatings by laser cladding".OPTICS AND LASER TECHNOLOGY 103(2018):8-16. |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
IrJ2018282.pdf(2808KB) | 期刊论文 | 出版稿 | 开放获取 | CC BY-NC-SA | 浏览 下载 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论