Metal ductility evaluation by flattening test: The geometry dependence | |
Wang Y; Yang GX; Lei XQ(雷现奇); Li Q; Rong LJ; Hu XF; Wei YJ(魏宇杰) | |
发表期刊 | INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING |
2019-02-01 | |
卷号 | 170页码:40-48 |
ISSN | 0308-0161 |
摘要 | The reliability of pipes, tubes and liquid tanks (cylinders) is of paramount significance to our life. The typical way to examine the ability of those structures to undergo plastic deformation is to apply a flattening test. In this paper, we used the Gurson-Tvergaard-Needleman damage model and finite element simulations to capture the flattening of a tube made of typical pipe materials. We demonstrated how the tube thickness, radius, and length would affect the critical displacement where tube failure initiates. For flattening with platens, the failure displacement first increases with tube length and reaches a peak value, and it then decreases and converges to a constant value for a particular geometry. The failure initiates at the two edges of short tubes, but shifts to the center in intermediate tubes where the failure displacement maximizes. Failure then always starts from the middle in even longer tubes. In contrast, flattening with indenters exhibits two peaks in the compressible displacement vs. tube length curve. In the end, we proposed effective experimental strategies to obtain the intrinsic ability of tubes under plastic deformation. The results reported here could be employed to characterize the mechanical properties of materials for pipes, tubes and tanks, and they could also be applied to guide the engineering design of such structures. |
关键词 | Flattening test Plastic deformability Gerson-Tvergaard-Needleman model Failure Finite element analysis |
DOI | 10.1016/j.ijpvp.2019.01.007 |
收录类别 | SCI ; EI |
语种 | 英语 |
WOS记录号 | WOS:000459951000005 |
关键词[WOS] | ENERGY-ABSORPTION ; VOID NUCLEATION ; FRACTURE |
WOS研究方向 | Engineering, Multidisciplinary ; Engineering, Mechanical |
WOS类目 | Engineering |
项目资助者 | National Natural Science Foundation of China (NSFC) [11425211] ; Strategic Priority Research Program of the Chinese Academy of Sciences [XDB22020200] ; National Key R&D Program of China [2017YFB1201302-10A] ; Basic Scientific Research Foundation of Beijing Jiaotong University [M14JB00130] |
论文分区 | 二类 |
力学所作者排名 | 1 |
RpAuthor | Wei, YJ |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://dspace.imech.ac.cn/handle/311007/78488 |
专题 | 非线性力学国家重点实验室 |
作者单位 | 1.{Wang, Yao、Yang, Guangxue、Li, Qiang、Wei, Yujie} Beijing Jiaotong Univ, Engn Res Ctr Struct Reliabil & Operat Measurement, Minist Educ, Beijing 100044, Peoples R China 2.{Lei, Xianqi、Wei, Yujie} Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech LNM, Beijing 100190, Peoples R China 3.{Rong, Lijian、Hu, Xiaofeng} Chinese Acad Sci, Key Lab Nucl Mat & Safety Assessment, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China |
推荐引用方式 GB/T 7714 | Wang Y,Yang GX,Lei XQ,et al. Metal ductility evaluation by flattening test: The geometry dependence[J]. INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING,2019,170:40-48. |
APA | Wang Y.,Yang GX.,雷现奇.,Li Q.,Rong LJ.,...&魏宇杰.(2019).Metal ductility evaluation by flattening test: The geometry dependence.INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING,170,40-48. |
MLA | Wang Y,et al."Metal ductility evaluation by flattening test: The geometry dependence".INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING 170(2019):40-48. |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
Jp2019066.pdf(2257KB) | 期刊论文 | 出版稿 | 开放获取 | CC BY-NC-SA | 浏览 下载 |
个性服务 |
推荐该条目 |
保存到收藏夹 |
查看访问统计 |
导出为Endnote文件 |
Lanfanshu学术 |
Lanfanshu学术中相似的文章 |
[Wang Y]的文章 |
[Yang GX]的文章 |
[雷现奇]的文章 |
百度学术 |
百度学术中相似的文章 |
[Wang Y]的文章 |
[Yang GX]的文章 |
[雷现奇]的文章 |
必应学术 |
必应学术中相似的文章 |
[Wang Y]的文章 |
[Yang GX]的文章 |
[雷现奇]的文章 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论