IMECH-IR  > 高温气体动力学国家重点实验室
Weighting by Cross-Validation: A Calibration Method for Force Measurements via Transient Response Analysis
Luo ZT(罗长童); Wang YP(汪运鹏); Hu ZM(胡宗民); Li JP(李进平); Jiang ZL(姜宗林)
Corresponding AuthorLuo, C.(luo@imech.ac.cn)
Source PublicationEXPERIMENTAL TECHNIQUES
2019-08-01
Volume43Issue:4Pages:469-478
ISSN0732-8818
AbstractTransient response analysis is an indirect method for the measurement of the aerodynamic force experienced by hypersonic vehicles in impulse wind-tunnel facilities; a transfer function is identified by a calibration experiment in advance and is then used to recover the target aerodynamic force. Theoretically, the transfer function is unique for a given measurement system. However, the calibration experiment may involve unpredictable factors and noise that are inevitable in practical applications, which will result in systematic errors. In this paper, a new calibration method, weighting by cross-validation (WCV), is proposed to reduce the systematic errors. In WCV, a series of on-site calibration experiments are carried out to obtain a set of transfer functions prior to the wind tunnel test. The transfer functions are cross-validated against each other to create a cross-validation table of relative measurement errors. The aerodynamic force is then calibrated using the average and standard deviation of the cross-validation errors. The working mechanism of the WCV method is demonstrated by analogy of measurements with a set of non-standard rulers. The effectiveness of the WCV method has been verified by tests in the JF-12 shock tunnel. Studies show that the WCV method improves the measurement accuracy significantly. In addition, the concept of the WCV method is general and can also be applied to other indirect measurement problems to reduce systematic errors, especially when no exact/standard measurement tools are available.
KeywordAerodynamic force measurement Dynamic system Impact response Cross-validation System identification
DOI10.1007/s40799-018-00296-7
Indexed BySCI ; EI
Language英语
WOS IDWOS:000482471100009
WOS KeywordIISC SHOCK TUNNEL ; MISSILE CONFIGURATIONS ; DRAG BALANCE ; DESIGN ; MODEL
WOS Research AreaEngineering ; Mechanics ; Materials Science
WOS SubjectEngineering, Mechanical ; Mechanics ; Materials Science, Characterization & Testing
Funding ProjectNational Natural Science Foundation of China[11532014]
Funding OrganizationNational Natural Science Foundation of China
ClassificationQ3
Ranking1
Citation statistics
Document Type期刊论文
Identifierhttp://dspace.imech.ac.cn/handle/311007/79941
Collection高温气体动力学国家重点实验室
Recommended Citation
GB/T 7714
Luo ZT,Wang YP,Hu ZM,et al. Weighting by Cross-Validation: A Calibration Method for Force Measurements via Transient Response Analysis[J]. EXPERIMENTAL TECHNIQUES,2019,43(4):469-478.
APA 罗长童,汪运鹏,胡宗民,李进平,&姜宗林.(2019).Weighting by Cross-Validation: A Calibration Method for Force Measurements via Transient Response Analysis.EXPERIMENTAL TECHNIQUES,43(4),469-478.
MLA 罗长童,et al."Weighting by Cross-Validation: A Calibration Method for Force Measurements via Transient Response Analysis".EXPERIMENTAL TECHNIQUES 43.4(2019):469-478.
Files in This Item:
There are no files associated with this item.
Related Services
Recommend this item
Bookmark
Usage statistics
Export to Endnote
Google Scholar
Similar articles in Google Scholar
[罗长童]'s Articles
[汪运鹏]'s Articles
[胡宗民]'s Articles
Baidu academic
Similar articles in Baidu academic
[罗长童]'s Articles
[汪运鹏]'s Articles
[胡宗民]'s Articles
Bing Scholar
Similar articles in Bing Scholar
[罗长童]'s Articles
[汪运鹏]'s Articles
[胡宗民]'s Articles
Terms of Use
No data!
Social Bookmark/Share
All comments (0)
No comment.
 

Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.