Fluid flow and solute dilution in laser linear butt joining of 304SS and Ni

doi:10.1016/j.ijheatmasstransfer.2020.120233

IMECH-IR > 先进制造工艺力学实验室

	Fluid flow and solute dilution in laser linear butt joining of 304SS and Ni
	Li ZY(李志永)1,2; Yu G(虞钢)1,2,3 ; He XL(何秀丽)1,2 ; Li SX(李少霞)1,2 ; Li ZX(李梓洵)1,2
通讯作者	Yu, Gang(gyu@imech.ac.cn) ; He, Xiuli(xlhe@imech.ac.cn)
发表期刊	INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
	2020-11-01
卷号	161 页码:16
ISSN	0017-9310
摘要	Laser linear welding combined with advanced auto-control technology is a promising joint method of dissimilar metals. In this study, an improved three-dimensional model was developed to investigate the thermal behavior, fluid flow and concentration dilution during laser linear dissimilar welding of 304 stainless steel and nickel. The fluid flow and solidification behavior were presented in a 3D view to deeply study the thermal behavior and convection characteristics inside the melt pool. The relationship between dynamic characteristics and concentration dilution was studied numerically and experimentally, and the effects of welding speed, temperature coefficient of surface tension (TCST) and dynamic viscosity on mass transfer were also investigated. Larger cooling rate (GR) and smaller morphology parameter (G/R) were found at top area of the weld pool (WP). Elements from SS (Cr and Fe) were mainly mixed at front side, but Ni was mainly diluted at middle part. Resulting from the Marangoni convection, all the elements were mainly mixed at top area and then transported to the bottom. The redistribution of the species was also observed at each side, resulting in a relatively uniform distribution at each side. Nevertheless, the effects of welding speed, TCST and dynamic viscosity on solute dilution were simulated and proved non-negligible. Differences of solidification and dilution phenomenon were also observed between liner welding and spot welding. It was demonstrated the obtained results in this work provided a vital perspective in comprehending the heat and mass transfer phenomenon inside the melt pool during welding and additive manufacturing process. (C) 2020 Elsevier Ltd. All rights reserved.
关键词	Thermal behavior Fluid flow Solidification characteristics Mass transfer Dissimilar welding Additive manufacturing
DOI	10.1016/j.ijheatmasstransfer.2020.120233
收录类别	SCI ; EI
语种	英语
WOS记录号	WOS:000571813900025
关键词[WOS]	THERMAL-BEHAVIOR ; HEAT-TRANSFER ; PHASE-CHANGE ; CONVECTION ; METAL ; SOLIDIFICATION ; SIMULATION ; TRANSPORT
WOS研究方向	Thermodynamics ; Engineering ; Mechanics
WOS类目	Thermodynamics ; Engineering, Mechanical ; Mechanics
资助项目	National Natural Science Foundation of China[11672304] ; Beijing Municipal Commission of Science and Technology[Z181100003818015]
项目资助者	National Natural Science Foundation of China ; Beijing Municipal Commission of Science and Technology
论文分区	一类
力学所作者排名	1
RpAuthor	Yu, Gang ; He, Xiuli
引用统计	被引频次：14[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://dspace.imech.ac.cn/handle/311007/85304
专题	先进制造工艺力学实验室
作者单位	1.Chinese Acad Sci, Inst Mech, Key Lab Mech Adv Mfg, Beijing 100190, Peoples R China; 2.Univ Chinese Acad Sci, Sch Engn Sci, Beijing 100049, Peoples R China; 3.Univ Chinese Acad Sci, Ctr Mat Sci & Optoelect Engn, Beijing 100049, Peoples R China
推荐引用方式 GB/T 7714	Li ZY,Yu G,He XL,et al. Fluid flow and solute dilution in laser linear butt joining of 304SS and Ni[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,2020,161:16.
APA	李志永,虞钢,何秀丽,李少霞,&李梓洵.(2020).Fluid flow and solute dilution in laser linear butt joining of 304SS and Ni.INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,161,16.
MLA	李志永,et al."Fluid flow and solute dilution in laser linear butt joining of 304SS and Ni".INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER 161(2020):16.

条目包含的文件		下载所有文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
Jp2020327.pdf（9074KB）	期刊论文	出版稿	开放获取	CC BY-NC-SA	浏览下载