Fatigue properties and S-N curve estimating of 316L stainless steel prepared by SLM | |
Zeng, Fanyu1; Yang YT(杨永泰)1,2; Qian GA(钱桂安)2,3 | |
通讯作者 | Yang, Yongtai(yangyongtai@fjirsm.ac.cn) |
发表期刊 | INTERNATIONAL JOURNAL OF FATIGUE |
2022-09-01 | |
卷号 | 162页码:21 |
ISSN | 0142-1123 |
摘要 | This paper investigates the fatigue properties of 316L stainless steel manufactured by selective laser melting technology (SLM) under hot-isostatic-pressing (HIP) heat-treatment. The fatigue tests of 316L specimens were carried out under pulse tensile cyclic loading to obtain the fatigue performance. To avoid falling into local optima and improve the convergence speed, the dynamic multiswarm particle swarm optimizer (DMS-PSO) algorithm was first introduced for parameter optimization of the three-parameter Weibull distribution model, and then the S-N curves based on the model were obtained. The S-N curves were highly consistent with the metallographic and fractographic phenomena. Besides, both the S-N curves and fractographic analysis show that the resistance of high-stress fatigue fracture is significantly improved by using HIP heat-treatment. |
关键词 | Metal additive manufacturing 316L stainless steel DMS-PSO Fatigue performance S-N curve |
DOI | 10.1016/j.ijfatigue.2022.106946 |
收录类别 | SCI ; EI |
语种 | 英语 |
WOS记录号 | WOS:000799365200004 |
关键词[WOS] | HIGH-CYCLE FATIGUE ; MECHANICAL-PROPERTIES ; PROCESS PARAMETERS ; BEHAVIOR ; MICROSTRUCTURE ; LIFE ; METALS ; PARTS |
WOS研究方向 | Engineering ; Materials Science |
WOS类目 | Engineering, Mechanical ; Materials Science, Multidisciplinary |
资助项目 | Science and Technology Project of Quanzhou, China[2019STS01] ; Collaborative Innovation Platform Project of the Fuxiaquan National Independent Innovation Demonstration Zone, China[2020FX01] |
项目资助者 | Science and Technology Project of Quanzhou, China ; Collaborative Innovation Platform Project of the Fuxiaquan National Independent Innovation Demonstration Zone, China |
论文分区 | 一类 |
力学所作者排名 | 2 |
RpAuthor | Yang, Yongtai |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://dspace.imech.ac.cn/handle/311007/89496 |
专题 | 非线性力学国家重点实验室 |
作者单位 | 1.Chinese Acad Sci, Quanzhou Inst Equipment Mfg, Fujian Inst Res Struct Matter, Jinjiang 362200, Fujian, Peoples R China; 2.Univ Chinese Acad Sci, Beijing 100049, Peoples R China; 3.Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech LNM, Beijing 100190, Peoples R China |
推荐引用方式 GB/T 7714 | Zeng, Fanyu,Yang YT,Qian GA. Fatigue properties and S-N curve estimating of 316L stainless steel prepared by SLM[J]. INTERNATIONAL JOURNAL OF FATIGUE,2022,162:21. |
APA | Zeng, Fanyu,杨永泰,&钱桂安.(2022).Fatigue properties and S-N curve estimating of 316L stainless steel prepared by SLM.INTERNATIONAL JOURNAL OF FATIGUE,162,21. |
MLA | Zeng, Fanyu,et al."Fatigue properties and S-N curve estimating of 316L stainless steel prepared by SLM".INTERNATIONAL JOURNAL OF FATIGUE 162(2022):21. |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
Jp2022FA172_2022_Fat(16797KB) | 期刊论文 | 出版稿 | 开放获取 | CC BY-NC-SA | 浏览 下载 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论