Statistical Analysis of Morphological Characteristics of Inconel 718 Formed by High Deposition Rate and High Laser Power Laser Cladding

doi:10.3390/ma17030638

IMECH-IR > 宽域飞行工程科学与应用中心

	Statistical Analysis of Morphological Characteristics of Inconel 718 Formed by High Deposition Rate and High Laser Power Laser Cladding
	Bian YH(边艳华); He XL(何秀丽); Tian CX(田崇鑫); Guo, Jianhao; Chen B(陈博); Dong BX(董斌鑫); Li SX(李少霞); Yu G(虞钢)
通讯作者	Li, Shaoxia(lisx@imech.ac.cn) ; Yu, Gang(gyu@imech.ac.cn)
发表期刊	MATERIALS
	2024-02-01
卷号	17 期号:3 页码:19
摘要	Laser cladding is one of the emerging additive manufacturing technologies and has been adopted in various industrial fields. In this study, the morphological characteristics of a single clad of Inconel 718 manufactured by coaxial laser cladding with high laser power from 4200 W to 5400 W, powder feeding rate from 25 g/min to 50 g/min, and cladding speed from 20 mm/s to 50 mm/s are studied. The cross-section of the melt pool is analyzed and classified by type into three types: shallow dilution, flat dilution, and fluctuating dilution. Nine parameters are designed to describe the morphological characteristics of the clad, and the corresponding linear regression models are developed to establish a quantitative relationship between the combined process parameters and morphological characteristics. The results indicate that the total area of the cross-section A, the clad area above the substrate Ac, the area of the molten substrate Am, the total height of the cross-section H, the height of the clad above the substrate hc, the penetration depth hm, the clad width W, the dilution ratio D, and the wetting angle theta are determined by complex coupling of energy input and mass accumulation, and they are proportional to PF0.4/V, P0.5F/V, P/F0.2/V0.4, P2F0.6/V, PF0.7/V, P2/F/V0.3, P/V0.8, P/FV0.2, and PF7/V0.8, respectively. The large linear regression coefficients and the analysis residuals indicate the high reliability of the statistical linear regression models. This work aims to provide a comprehensive understanding of the influence of the main processing parameters on the morphological characteristics of the clad, which is of great value in providing a reference and laying a basis for the practical application of laser cladding technology at a high deposition rate.
关键词	laser cladding Inconel 718 clad morphology linear regression analysis high deposition rate
DOI	10.3390/ma17030638
收录类别	SCI ; EI
语种	英语
WOS记录号	WOS:001160148900001
关键词[WOS]	POWDER ; MODEL ; PREDICTION ; GEOMETRY
WOS研究方向	Chemistry ; Materials Science ; Metallurgy & Metallurgical Engineering ; Physics
WOS类目	Chemistry, Physical ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering ; Physics, Applied ; Physics, Condensed Matter
资助项目	National Key R&D Program of China
项目资助者	National Key R&D Program of China
论文分区	二类
力学所作者排名	1
RpAuthor	Li, Shaoxia ; Yu, Gang
引用统计
文献类型	期刊论文
条目标识符	http://dspace.imech.ac.cn/handle/311007/94346
专题	宽域飞行工程科学与应用中心
推荐引用方式 GB/T 7714	Bian YH,He XL,Tian CX,et al. Statistical Analysis of Morphological Characteristics of Inconel 718 Formed by High Deposition Rate and High Laser Power Laser Cladding[J]. MATERIALS,2024,17,3,:19.
APA	边艳华.,何秀丽.,田崇鑫.,Guo, Jianhao.,陈博.,...&虞钢.(2024).Statistical Analysis of Morphological Characteristics of Inconel 718 Formed by High Deposition Rate and High Laser Power Laser Cladding.MATERIALS,17(3),19.
MLA	边艳华,et al."Statistical Analysis of Morphological Characteristics of Inconel 718 Formed by High Deposition Rate and High Laser Power Laser Cladding".MATERIALS 17.3(2024):19.