Chinese | English

Scholar Page

Keywords Cloud

Research Outputs

Co-authors[TOP 5]

Usage Statistics


  Total Views
 1222
  Access Source
    internal： 6
    External： 1216
    Domestic： 958
    Abroad： 264

  Annual Views
 663
  Access Source
    internal： 2
    External： 661
    Domestic： 585
    Abroad： 78

  Monthly Views
 303
  Access Source
    internal： 0
    External： 303
    Domestic： 241
    Abroad： 62

Visits

Visits

1. Laminar flame speeds of hydrocarbon + air mixtures with hydrogen a.. [2277]
2. Quasi-Dammann Grating With Proportional Intensity Array Spots [2236]
3. Temperature and composition profile during double-track laser clad.. [2068]
4. Numerical simulation and experimental investigation of laser overl.. [2046]
5. Laser drilling improving circuit board manufacturing [1928]
6. Microstructure Study Of Laser Welding Cast Nickel-Based Superalloy.. [1839]
7. Single-row laser beam with energy strengthened ends for continuous.. [1793]
8. 异种金属激光焊接关键问题研究 [1702]
9. Numerical simulation of thermal loading produced by shaped high po.. [1645]
10. 激光熔覆Ta-W合金涂层工艺方法研究 [1618]
11. 粉末性质对同轴送粉激光熔覆中粉末流场的影响规律 [1547]
12. 激光打孔工艺参数对孔型影响的二维数值模拟研究 [1531]
13. 平衡支架与配重铅块的激光焊接方法 [1499]
14. Numerical simulation of thermal behavior and multicomponent mass t.. [1460]
15. Research on laser welding of cast Ni-based superalloy K418 turbo d.. [1422]
16. Thermal fatigue on pistons induced by shaped high power laser. Par.. [1413]
17. Quasi-Dammann grating with proportional intensity of array spots f.. [1409]
18. Thermal fatigue on pistons induced by shaped high power laser. Par.. [1396]
19. 高密度激光作用下的固/液、气/液界面演化及其热、力效应 [1387]
20. 集成激光制造系统加工过程计算机模拟 [1371]
21. Heat and mass transfer in laser dissimilar welding of stainless st.. [1342]
22. 气缸盖气门座激光强化工艺 [1331]
23. Laser surface hardening of 42CrMo cast steel for obtaining a wide .. [1325]
24. Dissimilar autogenous full penetration welding of superalloy K418 .. [1316]
25. Effects of laser power density on static and dynamic mechanical pr.. [1306]
26. 激光打孔过程三维瞬态数值模拟 [1264]
27. 连续移动三维瞬态激光熔池温度场数值模拟 [1263]
28. 等离子熔覆gamma/Cr7C3复合材料涂层组织与耐磨性研究 [1237]
29. Partition Energy Absorption of Axially Crushed Aluminum Foam-Fille.. [1226]
30. 考虑弹性影响的活塞环动力响应 [1195]
31. K418合金和42CrMo钢激光焊焊缝的微观组织 [1187]
32. 一种用于激光焊接头的保护装置 [1187]
33. Carbon Nanotube Reinforced Hydroxyapatite Composite Coatings Produ.. [1183]
34. 柴油机缸套安装变形数值分析 [1183]
35. 同轴送粉激光熔覆中粉末流对光束能量的衰减作用 [1158]
36. 重力对锥形血管中血流压力的影响——基于考虑体位改变的三维流固耦合数.. [1149]
37. Solute transport and composition profile during direct metal depos.. [1145]
38. 高密度激光制造技术在超燃冲压发动机热防护中的应用 [1142]
39. Laser-surface-alloyed carbon nanotubes reinforced hydroxyapatite c.. [1115]
40. Numerical Simulation of Pulsed Laser Transformation Hardening [1107]
41. 激光先进制造技术及其应用 [1104]
42. 一种无创多路脉搏波检测方法 [1073]
43. Modeling of thermal behavior and mass transport in multi-layer las.. [1072]
44. 高温高应变率下激光焊接件力学性能研究 [1071]
45. Microstructural and mechanical characteristics of laser welding of.. [1066]
46. Numerical study of thermal history in laser aided direct metal dep.. [1066]
47. 多孔材料填充薄壁结构吸能的相互作用效应 [1060]
48. 活塞横向运动及其对活塞环径向失效的影响 [1056]
49. Characteristics of deep penetration laser welding of dissimilar me.. [1053]
50. Study on the temperature field loaded by a shaped laser beam on th.. [1053]
51. 基于激光加热技术的活塞热负荷试验方法研究 [1043]
52. 激光制造工艺力学 [1042]
53. 同轴送粉激光成形中粉末与激光的相互作用 [1036]
54. 五轴框架式机器人激光加工系统 轨迹算法研究 [1028]
55. 异种不锈钢激光焊缝材料的动态本构关系 [1025]
56. 冲压模具激光表面强化的搭接工艺研究 [1021]
57. 自由曲面激光强化的轨迹优化研究 [1018]
58. 考虑体位改变的血流动力学数学模型 [1015]
59. 高温高应变率下激光焊接件力学性能研究 [1006]
60. 喷孔几何特征对变截面喷油孔空穴流动状态的影响 [1004]
61. 送粉式激光熔覆中瞬态温度场与几何形貌的三维数值模拟 [994]
62. Numerical and Experimental Investigations of Solidification Parame.. [978]
63. K418与42CrMo异种金属的激光穿透焊接 [976]
64. Laser Surface Modified Ductile Iron by Pulsed Nd: YAG Laser Beam w.. [970]
65. 不锈钢激光搭接焊接头温度场数值模拟及分析 [967]
66. K418与42CrMo异种金属激光焊接接头组织与力学性能 [955]
67. Investigation on the Interaction of Laser Beam and Metal Powders C.. [953]
68. Surface-active element transport and its effect on liquid metal fl.. [953]
69. Analysis of surface tension driven flow and solidification behavio.. [945]
70. High-power laser beam shaping by inseparable two-dimensional binar.. [927]
71. K418与42CrMo异种金属激光焊接缺陷形成机制 [926]
72. K418高温合金和42CrMo合金钢的激光焊接 [925]
73. 活塞环几何参数对发动机性能影响 [913]
74. 激光熔覆Ta-W合金组织及高温气动烧蚀性能 [904]
75. 用欧拉法对薄壁件激光直接成形建模 [903]
76. 一种激光整形方法及整形后激光硬化处理设备及方法 [896]
77. Numerical Partition of Energy Absorption of Foam-filled Top-Hatand.. [881]
78. 激光束二元光学变换及其应用 [874]
79. Effects of interface conditions on heat and mass transfer during m.. [874]
80. Path Planner for Intelligent Laser Surface Modification [861]
81. 球墨铸铁变换激光束淬火性能的研究 [858]
82. In situ optical observations of keyhole dynamics during laser dril.. [856]
83. 集成化激光智能加工工程 [854]
84. 汽车模具棱边的三维自适应测量及六维加工轨迹划分 [853]
85. 具有特定光强分布的激光表面硬化技术 [851]
86. Transmission Electron Microscopy Characterization of Laser Welding.. [845]
87. 脉搏波波速特征点新算法 [833]
88. 基于PROFIBUS-DP的激光加工系统数字化控制 [831]
89. Numeric Calculation for Transient Thermal Stress Field in Wall-Sha.. [825]
90. Ni25Al75合金快速凝固过程中的包晶反应与凝固进程 [815]
91. A Numerical Model of Rapid Solidification Processing of Ni-Al Allo.. [795]
92. 激光诱发活塞的热负荷 [795]
93. 特定强度分布脉冲激光表面强化实验 [792]
94. 分形模糊神经网络诊断方法研究和应用 [790]
95. 球墨铸铁材料对激光的吸收率 [789]
96. Numerical study of heat transfer and solute distribution in hybrid.. [789]
97. Surface nanocrystallization of Cu-Cr alloy by a high power density.. [787]
98. Microstructural evolution and bonding characteristic in multi-laye.. [784]
99. 基于压力波的人体脉搏波传播速度无创检测研究 [781]
100. 脉冲激光表面强化数值模拟及热物性参量影响 [776]

Downloads

1. Quasi-Dammann Grating With Proportional Intensity Array Spots [1019]
2. Laminar flame speeds of hydrocarbon + air mixtures with hydrogen a.. [938]
3. Single-row laser beam with energy strengthened ends for continuous.. [834]
4. Temperature and composition profile during double-track laser clad.. [822]
5. Numerical simulation of thermal loading produced by shaped high po.. [789]
6. Microstructure Study Of Laser Welding Cast Nickel-Based Superalloy.. [679]
7. Laser drilling improving circuit board manufacturing [674]
8. Numerical simulation of thermal behavior and multicomponent mass t.. [667]
9. Thermal fatigue on pistons induced by shaped high power laser. Par.. [662]
10. Quasi-Dammann grating with proportional intensity of array spots f.. [658]
11. Numerical simulation and experimental investigation of laser overl.. [583]
12. Thermal fatigue on pistons induced by shaped high power laser. Par.. [576]
13. Effects of interface conditions on heat and mass transfer during m.. [569]
14. Study on the temperature field loaded by a shaped laser beam on th.. [566]
15. 高密度激光作用下的固/液、气/液界面演化及其热、力效应 [562]
16. Heat and mass transfer in laser dissimilar welding of stainless st.. [549]
17. 异种金属激光焊接关键问题研究 [534]
18. 激光熔覆Ta-W合金涂层工艺方法研究 [521]
19. Modeling of thermal behavior and mass transport in multi-layer las.. [517]
20. Dissimilar autogenous full penetration welding of superalloy K418 .. [497]
21. 集成激光制造系统加工过程计算机模拟 [496]
22. Partition Energy Absorption of Axially Crushed Aluminum Foam-Fille.. [490]
23. Analysis of surface tension driven flow and solidification behavio.. [490]
24. Numerical and Experimental Investigations of Solidification Parame.. [481]
25. Carbon Nanotube Reinforced Hydroxyapatite Composite Coatings Produ.. [472]
26. 激光打孔工艺参数对孔型影响的二维数值模拟研究 [460]
27. Surface-active element transport and its effect on liquid metal fl.. [456]
28. 连续移动三维瞬态激光熔池温度场数值模拟 [436]
29. 粉末性质对同轴送粉激光熔覆中粉末流场的影响规律 [429]
30. 同轴送粉激光成形中粉末与激光的相互作用 [420]
31. Numerical Simulation of Pulsed Laser Transformation Hardening [413]
32. 柴油机缸套安装变形数值分析 [399]
33. 考虑弹性影响的活塞环动力响应 [396]
34. 基于PROFIBUS-DP的激光加工系统数字化控制 [389]
35. 等离子熔覆gamma/Cr7C3复合材料涂层组织与耐磨性研究 [379]
36. 激光打孔过程三维瞬态数值模拟 [379]
37. 自由曲面激光强化的轨迹优化研究 [367]
38. Solute transport and composition profile during direct metal depos.. [366]
39. 平衡支架与配重铅块的激光焊接方法 [363]
40. Laser Surface Modified Ductile Iron by Pulsed Nd: YAG Laser Beam w.. [362]
41. Numeric Calculation for Transient Thermal Stress Field in Wall-Sha.. [361]
42. Numerical study of thermal history in laser aided direct metal dep.. [361]
43. Microstructural and mechanical characteristics of laser welding of.. [360]
44. 活塞横向运动及其对活塞环径向失效的影响 [356]
45. Laser-surface-alloyed carbon nanotubes reinforced hydroxyapatite c.. [354]
46. Characteristics of deep penetration laser welding of dissimilar me.. [354]
47. 喷孔几何特征对变截面喷油孔空穴流动状态的影响 [351]
48. 基于激光加热技术的活塞热负荷试验方法研究 [337]
49. 送粉式激光熔覆中瞬态温度场与几何形貌的三维数值模拟 [333]
50. Grain size evolution under different cooling rate in laser additiv.. [330]
51. 重力对锥形血管中血流压力的影响——基于考虑体位改变的三维流固耦合数.. [329]
52. K418与42CrMo异种金属激光焊接缺陷形成机制 [328]
53. 活塞环几何参数对发动机性能影响 [327]
54. A Numerical Model of Rapid Solidification Processing of Ni-Al Allo.. [321]
55. In situ optical observations of keyhole dynamics during laser dril.. [321]
56. 用欧拉法对薄壁件激光直接成形建模 [319]
57. Laser surface hardening of 42CrMo cast steel for obtaining a wide .. [317]
58. Research on laser welding of cast Ni-based superalloy K418 turbo d.. [316]
59. Experimental and numerical study on laser keyhole welding of 42CrM.. [315]
60. Surface Tension-Driven Flow and Its Correlation with Mass Transfer.. [315]
61. 高温高应变率下激光焊接件力学性能研究 [312]
62. 高密度激光制造技术在超燃冲压发动机热防护中的应用 [311]
63. 气缸盖气门座激光强化工艺 [311]
64. 高温高应变率下激光焊接件力学性能研究 [309]
65. Investigation on the Interaction of Laser Beam and Metal Powders C.. [303]
66. 一种无创多路脉搏波检测方法 [302]
67. 激光熔覆Ta-W合金组织及高温气动烧蚀性能 [300]
68. Comparative study of hybrid laser-MIG leading configuration on por.. [299]
69. K418与42CrMo异种金属的激光穿透焊接 [297]
70. 脉冲激光表面强化数值模拟及热物性参量影响 [295]
71. 一种用于激光焊接头的保护装置 [295]
72. K418合金和42CrMo钢激光焊焊缝的微观组织 [290]
73. 基于压力波的人体脉搏波传播速度无创检测研究 [289]
74. 五轴框架式机器人激光加工系统 轨迹算法研究 [288]
75. 脉搏波波速特征点新算法 [288]
76. 不锈钢激光搭接焊接头温度场数值模拟及分析 [287]
77. Effects of laser power density on static and dynamic mechanical pr.. [285]
78. 球墨铸铁变换激光束淬火性能的研究 [284]
79. 同轴送粉激光熔覆中粉末流对光束能量的衰减作用 [284]
80. Microstructural evolution and bonding characteristic in multi-laye.. [282]
81. 汽车模具棱边的三维自适应测量及六维加工轨迹划分 [279]
82. 激光智能制造系统中同步控制的实现 [277]
83. 激光熔覆Fe-W合金涂层的组织及性能 [276]
84. 分形模糊神经网络诊断方法研究和应用 [275]
85. 一种材料热物性参数和吸收率的校正方法 [271]
86. 集成激光制造系统的开放式控制研究 [268]
87. 神经网络在覆盖件模具表面激光硬化虚拟过程中的应用 [267]
88. Analysis of Laser Surface Hardened Layers of Automobile Engine Cyl.. [264]
89. 异种不锈钢激光焊缝材料的动态本构关系 [263]
90. 对达曼光栅进行二维扩展的矩形孔径光栅设计 [262]
91. 一种激光整形方法及整形后激光硬化处理设备及方法 [260]
92. Cow-eye microstructure evolution of laser pulse processed for duct.. [258]
93. 球墨铸铁材料对激光的吸收率 [257]
94. 集成化柔性激光加工系统的误差检测及其补偿 [255]
95. 激光参数对活塞热疲劳实验的影响 [255]
96. K418与42CrMo异种金属激光焊接接头组织与力学性能 [251]
97. Experimental and numerical study of thermal fatigue behavior under.. [249]
98. Path Planner for Intelligent Laser Surface Modification [247]
99. Ni25Al75合金快速凝固过程中的包晶反应与凝固进程 [247]
100. Numerical Partition of Energy Absorption of Foam-filled Top-Hatand.. [244]