Chinese | English

Scholar Page

Keywords Cloud

Research Outputs

Co-authors[TOP 5]

Usage Statistics


  Total Views
 1969
  Access Source
    internal： 31
    External： 1938
    Domestic： 1548
    Abroad： 421

  Annual Views
 203
  Access Source
    internal： 3
    External： 200
    Domestic： 180
    Abroad： 23

  Monthly Views
 188
  Access Source
    internal： 0
    External： 188
    Domestic： 165
    Abroad： 23

Visits

Visits

1. 超燃冲压发动机燃烧室热-结构试验研究 [2065]
2. 高超声速推进热结构轻量化设计与安全评估 [1849]
3. Laser heating induced plastic deformation in a pre-elastic-stretch.. [1790]
4. A coupled model on energy conversion in laser power beaming [1699]
5. Dynamic response of shear thickening fluid under laser induced sho.. [1626]
6. 高速列车通过隧道时气动阻力特性的CFD仿真分析 [1592]
7. A novel micro-scale plastic deformation feature on a bulk metallic.. [1579]
8. Microstructure and mechanical properties of an austenite NiTi shap.. [1557]
9. 点阵材料夹层结构主动冷却性能与热结构响应分析 [1514]
10. 超燃冲压发动机燃烧室隔热涂层开裂问题 [1498]
11. Experimental and numerical study of circular, stainless thin tube .. [1498]
12. A new effective method to estimate the effect of laser shock peeni.. [1494]
13. 超燃冲压发动机燃烧室典型异质材料连接结构的有限元分析 [1477]
14. Review on residual stress in selective laser melting additive manu.. [1464]
15. Failure mechanisms of a SiC particles 2024Al composite under dynam.. [1446]
16. 局部热载荷诱导热障涂层界面分层断裂问题 [1401]
17. Influence of tunnel length on the pressure wave generated by high-.. [1392]
18. Shock pressure induced by glass-confined laser shock peening: Expe.. [1377]
19. Interface delamination of the thermal barrier coating subjected to.. [1374]
20. A Semi-Empirical Equation of Penetration Depth on Concrete Target .. [1348]
21. Experimental and FEM studies on mechanical properties of single-la.. [1343]
22. 光纤激光干涉测量激光冲击强化自由表面速度 [1306]
23. Effects of laser power density on static and dynamic mechanical pr.. [1305]
24. Interlaminar damage of carbon fiber reinforced polymer composite l.. [1304]
25. Shock pressure induced by glass-confined laser shock peening: Expe.. [1303]
26. 轻质点阵主动冷却壁板热流固耦合响应分析 [1284]
27. Shedding phenomenon of ventilated partial cavitation around an und.. [1283]
28. 温度场与应力场对主动冷却发动机振动模态的影响 [1270]
29. Measurement of fast-changing low velocities by photonic Doppler ve.. [1262]
30. 三维瞬态方形管流的热流固耦合数值模拟 [1248]
31. 航行体有攻角出水全过程数值模拟 [1243]
32. 钨合金的冲击动力学性质及细微观结构的影响 [1240]
33. 主动冷却通道热流固耦合三维数值计算及构型应力分析 [1229]
34. Numerical analysis on load-bearing capacity and damage of double s.. [1226]
35. 基于卷积神经网络的深度学习流场特征识别及应用进展 [1207]
36. Effect of adhesive thickness, adhesive type and scarf angle on the.. [1200]
37. Study of Characteristics of Cloud Cavity Around Axisymmetric Proje.. [1199]
38. Geometrical scaling law for laser shock processing [1171]
39. Stiffness behaviour of injection moulded short glass fibre/impact .. [1150]
40. 动网格技术在非稳态空化流计算中的应用 [1147]
41. 激光冲击强化对NiTi形状记忆合金力学性质的影响 [1142]
42. Microstructure and mechanical behaviour of a SiC particles reinfor.. [1139]
43. Dynamic properties and asymmetry of tension and compression of met.. [1134]
44. 隧道长度对高速列车交会压力波的影响研究 [1131]
45. A study on the collapse of cavitation bubbles surrounding the unde.. [1122]
46. 一种模拟水平水下人工通气空化方法 [1115]
47. Effect of surface reflectivity on photonic Doppler velocimetry mea.. [1112]
48. 激光冲击处理304不锈钢表面的形貌特征及其机理分析 [1105]
49. 轻质金属点阵夹层板热屈曲临界温度分析 [1093]
50. 水下回转航行体的云状空化回射流运动特征研究 [1090]
51. On similarity criteria of thin-walled cylinder subjected to comple.. [1086]
52. 基于归一化应变梯度变化的损伤识别方法研究 [1080]
53. 用电子散斑干涉法测量材料热膨胀系数 [1069]
54. 高温高应变率下激光焊接件力学性能研究 [1068]
55. A Scaled Underwater Launch System Accomplished by Stress Wave Prop.. [1067]
56. Parametric study on single shot peening by dimensional analysis me.. [1065]
57. 基于分形的泡沫金属细观结构与尺寸效应研究 [1058]
58. 激光冲击强化诱导的冲击波压力特征研究 [1058]
59. Experimental Study on Dynamic Properties of High Strength Fiber Cl.. [1052]
60. 一种激光冲击强化过程工艺参数实时监测方法 [1050]
61. 多层介质对应力波传播特性影响分析 [1034]
62. A Semi-Empirical Equation of Penetration Depth on Concrete Target .. [1034]
63. Protective performance and dynamic behavior of composite body armo.. [1026]
64. 激光冲击强化诱导的残余应力影响因素分析 [1023]
65. MMCs的冲击力学性能及拉压不对称性研究 [1020]
66. 基于光纤光栅的结构健康监测技术及应用研究 [1020]
67. 激光辐照下充压圆筒变形的相似律问题 [1019]
68. 高温高应变率下激光焊接件力学性能研究 [1006]
69. 数字散斑相关法在高速变形测量中的应用 [1000]
70. 航行体垂直出水载荷与空泡溃灭机理分析 [996]
71. An experimental method to measure dynamic stress-strain relationsh.. [995]
72. Coupled thermal-fluid-structure behavior of airflow over target ir.. [994]
73. Modeling the Failure Behavior of CFRP Laminates Subjected to Combi.. [994]
74. 几种高性能纤维束的冲击动力学性能实验研究 [983]
75. 结构破坏的尺度律 [976]
76. 激光诱导变形条件下10#钢本构方程的建立 [967]
77. 结构钢中绝热剪切带形成与扩展的光学观测与数值模拟 [967]
78. 预加载结构局部异常热负荷破坏问题 [962]
79. Mechanical Properties And Constitutive Relationships Of 30Crmnsia .. [961]
80. Failure maps and optimal design of metallic sandwich panels with t.. [959]
81. 超声速气流下强激光辐照靶体失效数值模拟 [951]
82. Numerical analysis of effects of adhesive type and geometry on mix.. [944]
83. 水下回转航行体云状空化回射流运动特征研究 [941]
84. Mechanical properties and constitutive relationships of 30CrMnSiA .. [930]
85. Real-Time Measurement on Deformation Fields of Hole-Excavated Samp.. [925]
86. Study on performance degradation and damage modes of thin-film pho.. [916]
87. Studies on the Dynamic Buckling of Circular Plate Irradiated by La.. [914]
88. 压力波作用下二维椭圆形气泡界面演化规律研究 [914]
89. 方形管耦合传热及管道热应力分布数值模拟 [902]
90. Effect of mesh resolution on large eddy simulation of cloud cavita.. [901]
91. Deformation behavior of single crystal silicon induced by laser sh.. [895]
92. Effects of imperfect experimental conditions on stress waves in SH.. [895]
93. 激光冲击强化过程中蒸气等离子体压力计算的耦合模型 [889]
94. 激光聚焦爆炸耦合场的理论建模与跨尺度计算 [888]
95. Crushing behavior of a thin-walled circular tube with internal gra.. [885]
96. EXPERIMENTAL AND NUMERICAL STUDY OF THE CLOUD CAVITATING FLOW AROU.. [885]
97. Real-Time Measurement on Deformation Fields of Notched Samples Und.. [880]
98. 外部流场对激光加热运动目标影响的数值模拟 [873]
99. Real-Time Measurement on Deformation Fields of Hole-Excavated Samp.. [867]
100. 一种激光冲击强化过程中冲击波压力测量系统和方法 [864]

Downloads

1. Review on residual stress in selective laser melting additive manu.. [831]
2. On similarity criteria of thin-walled cylinder subjected to comple.. [771]
3. 超燃冲压发动机燃烧室热-结构试验研究 [692]
4. Dynamic response of shear thickening fluid under laser induced sho.. [637]
5. 压力波作用下二维椭圆形气泡界面演化规律研究 [629]
6. A Semi-Empirical Equation of Penetration Depth on Concrete Target .. [571]
7. Protective performance and dynamic behavior of composite body armo.. [571]
8. Effects of imperfect experimental conditions on stress waves in SH.. [562]
9. Influence of tunnel length on the pressure wave generated by high-.. [559]
10. 一种金属点阵夹层板的损伤识别方法 [545]
11. 一种用于导管架海洋平台结构的传感器位置与数目优化方法 [515]
12. 一种屈曲驱动大角度扭转的点阵结构设计 [515]
13. Study on performance degradation and damage modes of thin-film pho.. [490]
14. 一种用于高速水面航行器的水翼及设计方法 [482]
15. EXPERIMENTAL AND NUMERICAL STUDY OF THE CLOUD CAVITATING FLOW AROU.. [481]
16. Modeling the Failure Behavior of CFRP Laminates Subjected to Combi.. [476]
17. 光纤激光干涉测量激光冲击强化自由表面速度 [475]
18. Effect of adhesive thickness, adhesive type and scarf angle on the.. [470]
19. Microstructure and mechanical properties of an austenite NiTi shap.. [466]
20. Crushing behavior of a thin-walled circular tube with internal gra.. [451]
21. 温度场与应力场对主动冷却发动机振动模态的影响 [438]
22. Numerical analysis on load-bearing capacity and damage of double s.. [436]
23. Experimental and FEM studies on mechanical properties of single-la.. [426]
24. A new effective method to estimate the effect of laser shock peeni.. [424]
25. Shedding phenomenon of ventilated partial cavitation around an und.. [423]
26. A novel micro-scale plastic deformation feature on a bulk metallic.. [411]
27. 隧道长度对高速列车交会压力波的影响研究 [407]
28. 局部热载荷诱导热障涂层界面分层断裂问题 [405]
29. Model on thermal conductivity prediction of quasi-columnar structu.. [402]
30. Experimental study of the high-power laser resistance of ablative .. [402]
31. 多层介质对应力波传播特性影响分析 [401]
32. 超燃冲压发动机燃烧室隔热涂层开裂问题 [401]
33. A study on the collapse of cavitation bubbles surrounding the unde.. [399]
34. Shock pressure induced by glass-confined laser shock peening: Expe.. [389]
35. A Scaled Underwater Launch System Accomplished by Stress Wave Prop.. [387]
36. Geometrical scaling law for laser shock processing [383]
37. Study of Characteristics of Cloud Cavity Around Axisymmetric Proje.. [380]
38. 等离子体喷涂涂层细观结构与工艺相关性研究 [377]
39. 超燃冲压发动机燃烧室典型异质材料连接结构的有限元分析 [376]
40. 高超声速推进热结构轻量化设计与安全评估 [375]
41. Measurement of fast-changing low velocities by photonic Doppler ve.. [372]
42. Protective performance of shear stiffening gel-modified foam again.. [368]
43. Failure mechanisms of a SiC particles 2024Al composite under dynam.. [367]
44. 高速列车通过隧道时气动阻力特性的CFD仿真分析 [366]
45. Parametric study on single shot peening by dimensional analysis me.. [363]
46. Shock pressure induced by glass-confined laser shock peening: Expe.. [359]
47. 激光辐照碳纤维复合材料层合板热解效应与破坏行为 [353]
48. Effect of shear thickening gel on microstructure and impact resist.. [349]
49. 激光冲击强化对NiTi形状记忆合金力学性质的影响 [344]
50. Unsteady characteristics of cloud cavitating flow near the free su.. [343]
51. Effect of surface reflectivity on photonic Doppler velocimetry mea.. [342]
52. 钨合金的冲击动力学性质及细微观结构的影响 [341]
53. Experimental and numerical study of circular, stainless thin tube .. [340]
54. 航行体有攻角出水全过程数值模拟 [336]
55. 主动冷却通道热流固耦合三维数值计算及构型应力分析 [333]
56. Nonlinearity of interfaces and force transmission of bolted flange.. [331]
57. 轻质点阵主动冷却壁板热流固耦合响应分析 [330]
58. Stiffness behaviour of injection moulded short glass fibre/impact .. [328]
59. Experimental Study on Dynamic Properties of High Strength Fiber Cl.. [328]
60. 点阵材料夹层结构主动冷却性能与热结构响应分析 [328]
61. An experimental method to measure dynamic stress-strain relationsh.. [328]
62. Ablation behaviors of carbon reinforced polymer composites by lase.. [327]
63. 数字散斑相关法在高速变形测量中的应用 [326]
64. A coupled model on energy conversion in laser power beaming [326]
65. Laser heating induced plastic deformation in a pre-elastic-stretch.. [320]
66. Cloud Cavitating Flow That Surrounds a Vertical Hydrofoil Near the.. [320]
67. MMCs的冲击力学性能及拉压不对称性研究 [319]
68. 强激光与物质相互作用的若干研究进展 [319]
69. Protective performance of shear thickening gel modified epoxy seal.. [314]
70. 高温高应变率下激光焊接件力学性能研究 [312]
71. Coupled thermal-fluid-structure behavior of airflow over target ir.. [312]
72. 水下回转航行体的云状空化回射流运动特征研究 [310]
73. Mechanical properties and constitutive relationships of 30CrMnSiA .. [309]
74. 激光冲击强化诱导的残余应力影响因素分析 [309]
75. 激光诱导变形条件下10#钢本构方程的建立 [308]
76. 用电子散斑干涉法测量材料热膨胀系数 [307]
77. 高温高应变率下激光焊接件力学性能研究 [307]
78. Scaling Law in Laser-Induced Shock Effects of NiTi Shape Memory Al.. [307]
79. Maximizing mechanical properties and minimizing support material o.. [306]
80. Interface delamination of the thermal barrier coating subjected to.. [305]
81. Microstructure and mechanical behaviour of a SiC particles reinfor.. [303]
82. Experiment and simulation on air layer drag reduction of high-spee.. [303]
83. 基于光纤光栅的结构健康监测技术及应用研究 [302]
84. Study on mechanical properties of polyethylene with chain branchin.. [301]
85. 激光冲击处理304不锈钢表面的形貌特征及其机理分析 [300]
86. Deformation behavior of single crystal silicon induced by laser sh.. [300]
87. 一种模拟水平水下人工通气空化方法 [300]
88. 基于卷积神经网络的深度学习流场特征识别及应用进展 [299]
89. Dynamic properties and asymmetry of tension and compression of met.. [292]
90. Experimental study on dynamic compressive behaviour of sandwich pa.. [288]
91. Experimental investigation of unbound nodes identification for met.. [286]
92. 几种高性能纤维束的冲击动力学性能实验研究 [284]
93. 预加载结构局部异常热负荷破坏问题 [284]
94. Effects of laser power density on static and dynamic mechanical pr.. [284]
95. 结构破坏的尺度律 [281]
96. 基于归一化应变梯度变化的损伤识别方法研究 [281]
97. Ventilated cloud cavitating flow around a blunt body close to the .. [280]
98. A THEORETICAL ANALYSIS ON THE THERMAL BUCKLING BEHAVIOR OF FULLY C.. [279]
99. Interlaminar damage of carbon fiber reinforced polymer composite l.. [276]
100. Effects of thermal cycling on residual stress in alloy parts via s.. [275]