基于特征线的棱脊重构及加工轨迹规划算法

IMECH-IR > 力学所知识产出(1956-2008)

	基于特征线的棱脊重构及加工轨迹规划算法
Alternative Title	Reconstruction and Path Planning of Ridges Based on Feature Lines
	虞钢; 王建伦
Source Publication	中国机械工程
	2005-12-15
Volume	16 Issue:23 Pages:2083-2086
ISSN	1004-132X
Abstract	在基于三维曲面的激光强化加工中,针对某些特殊的加工表面,采用基于特征线的测量、重构及轨迹规划方法,可在不降低精度的基础上大幅度提高效率.主要针对常见的一种曲面类型即棱脊,介绍了基于特征线的棱脊重构及加工轨迹规划方法的应用.除适用于激光强化外,该方法对于一般的刀具加工也有一定的应用价值和参考意义.
Keyword	激光加工轨迹规划棱脊特征线
Indexed By	CSCD
Language	中文
CSCD ID	CSCD:2181919
Citation statistics
Document Type	期刊论文
Identifier	http://dspace.imech.ac.cn/handle/311007/41774
Collection	力学所知识产出(1956-2008)
Corresponding Author	虞钢
Recommended Citation GB/T 7714	虞钢,王建伦. 基于特征线的棱脊重构及加工轨迹规划算法[J]. 中国机械工程,2005,16,23,:2083-2086.
APA	虞钢,&王建伦.(2005).基于特征线的棱脊重构及加工轨迹规划算法.中国机械工程,16(23),2083-2086.
MLA	虞钢,et al."基于特征线的棱脊重构及加工轨迹规划算法".中国机械工程 16.23(2005):2083-2086.

Related Services

Bookmark

Lanfanshu

Similar articles in Bing Scholar

Terms of Use

No data!

Social Bookmark/Share

File name:	891.pdf
Format:	Adobe PDF

This file does not support browsing at this time

All comments (0)

No comment.

The comment function is only available to registered usersLog In

If you have any objections to this item, please fill out the form below and the administrator will contact you as soon as possible.
Content:
Email：	*
Institution:
Verification Code:	Refresh

Any comments and suggestions are welcomed.
Title:	*
Content:
Email：	*
Verification Code:	Refresh

中国科学院力学研究所机构知识库