Simultaneous improvement of tensile strength and ductility in micro-duplex structure consisting of austenite and ferrite | |
Chen L(陈柳); Yuan FP(袁福平); Jiang P(姜萍); Xie JJ(谢季佳); Wu XL(武晓雷); Wu XL(武晓雷) | |
发表期刊 | Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing |
2014 | |
卷号 | 618页码:563-571 |
ISSN | 0921-5093 |
摘要 | A micro-duplex structure consisting of austenite and ferrite was produced by equal channel angular pressing and subsequent intercritical annealing. As compared to coarse-grained (CG) counterpart, the strength and ductility of micro-duplex samples are enhanced simultaneously due to smaller grain sizes in both phases and more uniformly distributed austenite in ferrite matrix. The average yield stress and uniform elongation are increased to 540 MPa and 0.3 as compared to 403MPa and 0.26 of its CG counterpart respectively. The Hall–Petch coefficients of austenite and ferrite grain boundaries were quantitatively measured as 224.9 and 428.9 MPa μm1/2 respectively. In addition, a Hall–Petch type coefficient was used to describe the ability of phase boundary to obstruct dislocation motion, which was measured as 309.7 MPa μm1/2. Furthermore, the surface-to-volume ratio of phase boundary in micro-duplex structure was estimated to be 1.17×106 m−1, which is increased by an order of magnitude as compared to 1.2×105 m−1 of its CG counterpart. Based on the strain gradient theory, a model was proposed to describe the effect of surface-to-volume ratio of phase boundary on strain hardening rate, which shows a good agreement with the experimental results. |
关键词 | Duplex Stainless Steel Equal Channel Angular Pressing Strain Hardening Modeling Phase Boundary |
URL | 查看原文 |
收录类别 | SCI ; EI |
语种 | 英语 |
WOS记录号 | WOS:000344439500069 |
项目资助者 | The authors would like to thank the financial supports by 973 Program of China (Nos. 2012CB932203 and 2012CB937500) and NSFC (Grants nos. 51301187, 11222224, 11021262 and 11072243). |
课题组名称 | LNM材料介观力学性能的表征 |
论文分区 | 一类 |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://dspace.imech.ac.cn/handle/311007/49115 |
专题 | 非线性力学国家重点实验室 |
通讯作者 | Wu XL(武晓雷) |
推荐引用方式 GB/T 7714 | Chen L,Yuan FP,Jiang P,et al. Simultaneous improvement of tensile strength and ductility in micro-duplex structure consisting of austenite and ferrite[J]. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing,2014,618:563-571. |
APA | Chen L,Yuan FP,Jiang P,Xie JJ,Wu XL,&武晓雷.(2014).Simultaneous improvement of tensile strength and ductility in micro-duplex structure consisting of austenite and ferrite.Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing,618,563-571. |
MLA | Chen L,et al."Simultaneous improvement of tensile strength and ductility in micro-duplex structure consisting of austenite and ferrite".Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 618(2014):563-571. |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
1-s2.0-S092150931401(3202KB) | 开放获取 | 使用许可 | 浏览 下载 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论