Knowledge Management System of Institue of Mechanics, CAS
Characterization of Shear Banding in La-Based Bulk Metallic Glasses Through Indentation | |
Peng W(彭伟); Wei BC(魏炳忱); Zhang TH(张泰华); Liu Y(刘渊); Li L(李磊); Wei, B (reprint author), Chinese Acad Sci, Inst Mech, Natl Micrograv Lab, Beijing 100080, Peoples R China. | |
发表期刊 | MATERIALS TRANSACTIONS |
2007 | |
卷号 | 48期号:7页码:1759-1764 |
ISSN | 1345-9678 |
摘要 | La64Al14(Cu,Ni)(22), La(63.1)All(5.2)(Cu,Ni)(21.7), La57.6Al17.5(Cu,Ni)(24.9), and La55Al25Cu10Ni5Co5 bulk metallic glasses (BMGs) with low glass transition temperature (T-g) were prepared by copper-mould casting method. The homologous temperature (the ratio of room temperature to T-g) of the four BMGs ranges from 0.64 to 0.73. Plastic deformation behavior of the BMGs at various loading rates was studied by nanoindentation. The results showed that the loading rate dependency of serrated flow, which is related to the nucleation and propagation of shear bands, depends strongly on the homologous temperature. The alloys with relatively high homologous temperature exhibit an increase in flow serration with increasing loading rate. whereas. the alloys with low homologous temperature exhibit prominent serrations at low rates. No distinct shear band is observed around the indents for all alloys after nanoindentation at all the studied loading rates. Alternately, shear band pattern are characterized through macro-indentation. which shows that shear band spacing decreases with the increase of the homologous temperature. |
关键词 | Bulk Metallic Glass Plastic Deformation Shear Band Nanoindentation |
DOI | 10.2320/matertrans.MJ200761 |
收录类别 | SCI |
语种 | 英语 |
WOS记录号 | WOS:000248743100038 |
关键词[WOS] | INSTRUMENTED INDENTATION ; PLASTIC-DEFORMATION ; FLOW ; NANOINDENTATION ; ALLOY |
WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
WOS类目 | Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://dspace.imech.ac.cn/handle/311007/58448 |
专题 | 力学所知识产出(1956-2008) |
通讯作者 | Wei, B (reprint author), Chinese Acad Sci, Inst Mech, Natl Micrograv Lab, Beijing 100080, Peoples R China. |
推荐引用方式 GB/T 7714 | Peng W,Wei BC,Zhang TH,et al. Characterization of Shear Banding in La-Based Bulk Metallic Glasses Through Indentation[J]. MATERIALS TRANSACTIONS,2007,48,7,:1759-1764. |
APA | 彭伟,魏炳忱,张泰华,刘渊,李磊,&Wei, B .(2007).Characterization of Shear Banding in La-Based Bulk Metallic Glasses Through Indentation.MATERIALS TRANSACTIONS,48(7),1759-1764. |
MLA | 彭伟,et al."Characterization of Shear Banding in La-Based Bulk Metallic Glasses Through Indentation".MATERIALS TRANSACTIONS 48.7(2007):1759-1764. |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
JourArSuppl2016-158.(324KB) | 期刊论文 | 作者接受稿 | 开放获取 | CC BY-NC-SA | 浏览 下载 |
个性服务 |
推荐该条目 |
保存到收藏夹 |
查看访问统计 |
导出为Endnote文件 |
Lanfanshu学术 |
Lanfanshu学术中相似的文章 |
[彭伟]的文章 |
[魏炳忱]的文章 |
[张泰华]的文章 |
百度学术 |
百度学术中相似的文章 |
[彭伟]的文章 |
[魏炳忱]的文章 |
[张泰华]的文章 |
必应学术 |
必应学术中相似的文章 |
[彭伟]的文章 |
[魏炳忱]的文章 |
[张泰华]的文章 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论