Effect of Microstructure on the Onset Strain and Rate per Strain of Deformation-Induced Martensite Transformation in Q&P Steel by Modeling | |
Cao, Jingyi; Jin, Jianfeng1; Li, Shaojie; Wang, Mingtao; Tang, Shuai1; Peng Q(彭庆); Zong, Yaping | |
发表期刊 | MATERIALS |
2022-02 | |
卷号 | 15期号:3页码:952 |
摘要 | The effect of microstructure on the onset strain and rate of deformation-induced martensitic transformation (DIMT) in Q&P steel is studied by a mean-field micromechanics model, in which the residual austenite (RA) and primary martensite (M) phases are treated as elastoplastic particles embedded into the ferrite (F) matrix. The results show that when the volume fraction of the RA increases with a constant fraction of the M, the onset strain of DIMT increases and transformation rate decreases, in contrast to the case of the RA fraction effect with a fixed F fraction. Increasing the volume fraction of the M postpones the DIMT, regardless of the corresponding change from the RA or F fraction, which is similar to the effect of the RA fraction with the constant M but to a higher degree. Conversely, when increasing the fraction of the matrix F, the onset strain of DIMT increases and the rate decreases, and the effect is greater when the corresponding fraction change comes from the M rather than from the RA. Moreover, when the aspect ratio of the RA increases, the onset strain of DIMT decreases with a gradual increase in transformation rate, in agreement with the experimental observation that the equiaxial austenite is more stable in Q&P steels. However, the aspect ratio effect of the M is opposite to that of the RA, indicating that the lath-shaped primary martensite could protect the austenite from DIMT. |
关键词 | deformation-induced martensitic transformation microstructure onset strain of phase transformation Q&P steel micromechanics model |
学科领域 | Chemistry, Physical ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering ; Physics, Applied ; Physics, Condensed Matter |
DOI | 10.3390/ma15030952 |
收录类别 | SCI ; EI |
语种 | 英语 |
WOS记录号 | WOS:000755557500001 |
项目资助者 | Fundamental Research Funds for the Central Universities [N2007011] ; National Natural Science Foundation of China [52175293] ; Project of Introducing Talents of Discipline to Universities (111 Project) [B20029] |
论文分区 | 二类/Q1 |
力学所作者排名 | 3+ |
RpAuthor | Jin, JF (corresponding author), Northeastern Univ, Sch Mat Sci & Engn, Shenyang 110819, Peoples R China. ; Jin, JF (corresponding author), Northeastern Univ, State Key Lab Rolling & Automat, Shenyang 110819, Peoples R China. |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://dspace.imech.ac.cn/handle/311007/90189 |
专题 | 非线性力学国家重点实验室 |
作者单位 | 1.Northeastern Univ, Sch Mat Sci & Engn, Shenyang 110819, Peoples R China 2.Northeastern Univ, State Key Lab Rolling & Automat, Shenyang 110819, Peoples R China 3.Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech, Beijing 100190, Peoples R China |
推荐引用方式 GB/T 7714 | Cao, Jingyi,Jin, Jianfeng,Li, Shaojie,et al. Effect of Microstructure on the Onset Strain and Rate per Strain of Deformation-Induced Martensite Transformation in Q&P Steel by Modeling[J]. MATERIALS,2022,15,3,:952. |
APA | Cao, Jingyi.,Jin, Jianfeng.,Li, Shaojie.,Wang, Mingtao.,Tang, Shuai.,...&Zong, Yaping.(2022).Effect of Microstructure on the Onset Strain and Rate per Strain of Deformation-Induced Martensite Transformation in Q&P Steel by Modeling.MATERIALS,15(3),952. |
MLA | Cao, Jingyi,et al."Effect of Microstructure on the Onset Strain and Rate per Strain of Deformation-Induced Martensite Transformation in Q&P Steel by Modeling".MATERIALS 15.3(2022):952. |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
Jp2022FA526_2022_Eff(14303KB) | 期刊论文 | 出版稿 | 开放获取 | CC BY-NC-SA | 浏览 下载 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论