Analysis of spray characteristics of a jet film injection element based on Voronoi tessellation | |
He CM(何成明); Zhang, Peng2; He, Zhixia; Yue LJ(岳连捷) | |
发表期刊 | ACTA ASTRONAUTICA |
2023-05 | |
卷号 | 206页码:100-113 |
ISSN | 0094-5765 |
摘要 | The present paper presents a computational study based on a validated Volume of Fluid method on the effects of film thickness and film width on spray characteristics for the simplified jet film injection element with varying mass flow rate conditions. First, the spray characteristics of a typical jet film collision were analyzed in terms of the spatial distribution of Sauter Mean Diameter and Voronoi tessellation. Both the Voronoi diagram and the Sauter Mean Diameter contour are useful to evaluate the spray characteristics because they show two different aspects of the sprays. Second, the jet film spray characteristics were analyzed by decreasing either film thickness or film width to change the mass flow rate. The results show that decreasing film width results in approximately insensitive spray angle and improved uniformity of droplet distribution for different throttleable levels. The present computational results verified our design concept that adopting traditional jet film injection at a large mass flow rate and modified jet jet injection at a small mass flow rate to maintain good spray performance during the entire throttleable levels. |
关键词 | Liquid rocket engine Pintle injector Spray characteristics Jet film injection Voronoi tessellation |
DOI | 10.1016/j.actaastro.2023.02.006 |
收录类别 | SCI ; EI |
语种 | 英语 |
WOS记录号 | WOS:000950774500001 |
WOS研究方向 | Engineering, Aerospace |
WOS类目 | Engineering |
项目资助者 | National Science Foundation of China [12102437, 52176134, U2141220] ; Research Grants Council of the Hong Kong Special Administrative Region, China [CityU15222421] |
论文分区 | 二类/Q1 |
力学所作者排名 | 1 |
RpAuthor | Yue, LJ (corresponding author), Chinese Acad Sci, Inst Mech, Beijing 100190, Peoples R China. |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://dspace.imech.ac.cn/handle/311007/91819 |
专题 | 高温气体动力学国家重点实验室 |
作者单位 | 1.Jiangsu Univ, Inst Energy Res, Zhenjiang 212013, Peoples R China 2.Chinese Acad Sci, Inst Mech, Beijing 100190, Peoples R China 3.City Univ Hong Kong, Dept Mech Engn, Kowloon Tong, Kowloon, Hong Kong 999077, Peoples R China |
推荐引用方式 GB/T 7714 | He CM,Zhang, Peng,He, Zhixia,et al. Analysis of spray characteristics of a jet film injection element based on Voronoi tessellation[J]. ACTA ASTRONAUTICA,2023,206:100-113. |
APA | 何成明,Zhang, Peng,He, Zhixia,&岳连捷.(2023).Analysis of spray characteristics of a jet film injection element based on Voronoi tessellation.ACTA ASTRONAUTICA,206,100-113. |
MLA | 何成明,et al."Analysis of spray characteristics of a jet film injection element based on Voronoi tessellation".ACTA ASTRONAUTICA 206(2023):100-113. |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
Jp2023Fa024.pdf(20952KB) | 期刊论文 | 出版稿 | 开放获取 | CC BY-NC-SA | 浏览 下载 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论