| Deformation behavior, twinning propensity model, and twinnability map for laser powder bed fused austenitic steel homogenized by hot isostatic pressing | |
Zhang, Hongzhuang1; Cao, Shujie1; Li, Bing1; Berto, Filippo2; Qian GA(钱桂安)3 ; Li, Changyou1
| |
| Corresponding Author | Zhang, Hongzhuang(zhanghz@mail.neu.edu.cn) ; Qian, Guian(qianguian@imech.ac.cn) |
| Source Publication | INTERNATIONAL JOURNAL OF PLASTICITY
 |
| 2024-04-01 | |
| Volume | 175Pages:25 |
| ISSN | 0749-6419 |
| Abstract | Hot isostatic pressing (HIP) has emerged as a highly effective and extensively adopted technique for eliminating intrinsic flaws, mitigating residual stress, and addressing microstructural anisotropy in laser powder bed fused (L-PBF) metallic materials. However, the deformation behavior, strengthening mechanism, and associated mechanistic models of HIPed l-PBF austenitic steel remain largely unclear. Through multiple microstructural characterizations, this study determined that the primary deformation mechanism of HIPed l-PBF austenitic steel involved the emission of twinning partials from either the annealing twin boundaries or high-angle grain boundaries (HAGBs) with the decoration of extra dislocations and prismatic inclusions. A twinning propensity model was formulated based on the identified deformation mechanisms, revealing that the critical angle (theta tau-crit) for twinning partial emissions ranged from 25.64 degrees to 28.46 degrees By incorporating the mathematical relationship describing the force equilibrium state between trailing and twinning partials, a twinnability map considering both the crystallographic orientation and stress state (magnitude and direction) was established to guide the twinning control for desired mechanical properties. Finally, the accuracy of the twinning model and twinnability map was effectively confirmed using the microstructural results, whereas the limitations of the twinning model and twinnability map were reasonably examined through microdefect and texture analysis. The results of this study provided a significant theoretical framework for understanding the twinning behavior of high-performance and homogeneous l-PBF metallic materials. |
| Keyword | Laser powder bed fusion Austenitic steel Deformation behavior Twinning model Hot isostatic pressing |
| DOI | 10.1016/j.ijplas.2024.103940 |
| Indexed By | SCI ; EI |
| Language | 英语 |
| WOS ID | WOS:001209797000001 |
| WOS Keyword | STACKING-FAULT ENERGIES ; 304L STAINLESS-STEEL ; MECHANICAL-PROPERTIES ; INDUCED PLASTICITY ; HEAT-TREATMENT ; INCONEL 718 ; GRAIN-SIZE ; NUCLEATION ; EVOLUTION ; STRENGTH |
| WOS Research Area | Engineering ; Materials Science ; Mechanics |
| WOS Subject | Engineering, Mechanical ; Materials Science, Multidisciplinary ; Mechanics |
| Funding Project | Opening fund of State Key Laboratory of Nonlinear Mechanics ; National Natural Science Foundation of China[12272090] ; National Natural Science Foundation of China[12072345] ; National Natural Science Foundation of China[11932020] ; National Science and Technology Major Project ; Science Center for Gas Turbine Project ; Fundamental Research Funds for the Central Universities[P2022-B-III-008-001] ; [N2003006] ; [J2019-VI-0012-0126] |
| Funding Organization | Opening fund of State Key Laboratory of Nonlinear Mechanics ; National Natural Science Foundation of China ; National Science and Technology Major Project ; Science Center for Gas Turbine Project ; Fundamental Research Funds for the Central Universities |
| Classification | 一类 |
| Ranking | 1 |
| Contributor | Zhang, Hongzhuang ; Qian, Guian |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://dspace.imech.ac.cn/handle/311007/95026 |
| Collection | 非线性力学国家重点实验室 |
| Affiliation | 1.Northeastern Univ, Sch Mech Engn & Automation, Shenyang 110819, Peoples R China; 2.Sapienza Univ Rome, Dept Chem Engn Mat Environm, I-00184 Rome, Italy; 3.Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech LNM, Beijing 100190, Peoples R China |
| Recommended Citation GB/T 7714 | Zhang, Hongzhuang,Cao, Shujie,Li, Bing,et al. Deformation behavior, twinning propensity model, and twinnability map for laser powder bed fused austenitic steel homogenized by hot isostatic pressing[J]. INTERNATIONAL JOURNAL OF PLASTICITY,2024,175:25. |
| APA | Zhang, Hongzhuang,Cao, Shujie,Li, Bing,Berto, Filippo,钱桂安,&Li, Changyou.(2024).Deformation behavior, twinning propensity model, and twinnability map for laser powder bed fused austenitic steel homogenized by hot isostatic pressing.INTERNATIONAL JOURNAL OF PLASTICITY,175,25. |
| MLA | Zhang, Hongzhuang,et al."Deformation behavior, twinning propensity model, and twinnability map for laser powder bed fused austenitic steel homogenized by hot isostatic pressing".INTERNATIONAL JOURNAL OF PLASTICITY 175(2024):25. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment