Knowledge Management System of Institue of Mechanics, CAS
Structure and mechanical properties of ceramic coatings fabricated by plasma electrolytic oxidation on aluminized steel | |
Wu ZQ(吴振强); Xia Y(夏原); Li G(李光); Xu FT(徐方涛); Xia, Y (reprint author), Chinese Acad Sci, Inst Mech, Beijing 100080, Peoples R China. | |
发表期刊 | Applied Surface Science |
2007 | |
卷号 | 253期号:20页码:8398-8403 |
ISSN | 0169-4332 |
摘要 | Ceramic coatings were formed by plasma electrolytic oxidation (PEO) on aluminized steel. Characteristics of the average anodic voltages versus treatment time were observed during the PEO process. The micrographs, compositions and mechanical properties of ceramic coatings were investigated. The results show that the anodic voltage profile for processing of aluminized steel is similar to that for processing bulk Al alloy during early PEO stages and that the thickness of ceramic coating increases approximately linearly with the Al layer consumption. Once the Al layer is completely transformed, the FeAl intermetallic layer begins to participate in the PEO process. At this point, the anodic voltage of aluminized steel descends, and the thickness of ceramic coating grows more slowly. At the same time, some micro-cracks are observed at the Al2O3/FeAl interface. The final ceramic coating mainly consists of gamma-Al2O3, mullite, and alpha-Al2O3 phases. PEO ceramic coatings have excellent elastic recovery and high load supporting performance. Nanohardness of ceramic coating reaches about 19.6 GPa. (c) 2007 Elsevier B. V. All rights reserved. |
关键词 | Hot-dip Aluminum Plasma Electrolytic Oxidation Ceramic Coatings Steel Substrate Microarc Oxidation Alloy Surface |
DOI | 10.1016/j.apsuse.2007.04.007 |
收录类别 | SCI ; EI |
语种 | 英语 |
WOS记录号 | WOS:000249020600012 |
关键词[WOS] | MICROARC OXIDATION ; ALLOY ; SURFACE |
WOS研究方向 | Chemistry ; Materials Science ; Physics |
WOS类目 | Chemistry, Physical ; Materials Science, Coatings & Films ; Physics, Applied ; Physics, Condensed Matter |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://dspace.imech.ac.cn/handle/311007/33929 |
专题 | 力学所知识产出(1956-2008) |
通讯作者 | Xia, Y (reprint author), Chinese Acad Sci, Inst Mech, Beijing 100080, Peoples R China. |
推荐引用方式 GB/T 7714 | Wu ZQ,Xia Y,Li G,et al. Structure and mechanical properties of ceramic coatings fabricated by plasma electrolytic oxidation on aluminized steel[J]. Applied Surface Science,2007,253,20,:8398-8403. |
APA | 吴振强,夏原,李光,徐方涛,&Xia, Y .(2007).Structure and mechanical properties of ceramic coatings fabricated by plasma electrolytic oxidation on aluminized steel.Applied Surface Science,253(20),8398-8403. |
MLA | 吴振强,et al."Structure and mechanical properties of ceramic coatings fabricated by plasma electrolytic oxidation on aluminized steel".Applied Surface Science 253.20(2007):8398-8403. |
条目包含的文件 | 下载所有文件 | |||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
E168.pdf(1079KB) | 开放获取 | -- | 浏览 下载 |
个性服务 |
推荐该条目 |
保存到收藏夹 |
查看访问统计 |
导出为Endnote文件 |
Lanfanshu学术 |
Lanfanshu学术中相似的文章 |
[吴振强]的文章 |
[夏原]的文章 |
[李光]的文章 |
百度学术 |
百度学术中相似的文章 |
[吴振强]的文章 |
[夏原]的文章 |
[李光]的文章 |
必应学术 |
必应学术中相似的文章 |
[吴振强]的文章 |
[夏原]的文章 |
[李光]的文章 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论