IMECH-IR  > 非线性力学国家重点实验室
Shock and spall behaviors of a high specific strength steel: Effects of impact stress and microstructure
Wang W; Zhang HS(张虎生); Yang MX(杨沐鑫); Jiang P(姜萍); Yuan FP(袁福平); Wu XL(武晓雷); Yuan, FP (reprint author), Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech, 15,North 4th Ring,West Rd, Beijing 100190, Peoples R China.; Yuan, FP (reprint author), Univ Chinese Acad Sci, Sch Engn Sci, Beijing 100190, Peoples R China.
发表期刊JOURNAL OF APPLIED PHYSICS
2017-04-07
卷号121期号:13
ISSN0021-8979
摘要A series of plate-impact experiments were conducted to investigate the influences of impact stress and microstructure on the shock and spall behaviors of a high specific strength steel (HSSS). The HSSS shows a strong positive strain rate sensitivity on the yield strength. With increasing impact stress up to about 6 GPa the spall strength is found to decrease significantly and then levels off with further increasing impact stress. This trend is proposed to be attributed to the accumulation damage within the target as the initial shock-induced compression wave propagates through the target. The microcracks are clearly observed to nucleate from the interfaces between gamma-austenite and B2 phase and propagate along the interfaces or cut through the B2 phase in the HSSS during the spalling process. The Hugoniot elastic limit and the spall strength were found to be highly dependent on the microstructure. The spall strength was found to be higher when the density of the void nucleation sites is lower indicating that the spall strength should be a microstructure parameter of the HSSS under impact tensile conditions depending on the density of phase interfaces. It was also found that there is a tradeoff between the specific yield strength and the spall strength for this HSSS; thus the current findings should provide insights for achieving an optimal combination of both mechanical properties for impact-resistant applications by tailoring the microstructure. Published by AIP Publishing.
DOI10.1063/1.4979346
收录类别SCI ; EI
语种英语
WOS记录号WOS:000398636600041
关键词[WOS]INDUCED PLASTICITY STEELS ; VOID GROWTH ; STRAIN-RATE ; DUCTILE FRACTURE ; ALLOY STEELS ; MODEL ; COMPRESSION ; DAMAGE ; SOLIDS ; DEFORMATION
WOS研究方向Physics
WOS类目Physics, Applied
项目资助者NSFC(11672313 ; National Key Basic Research Program of China(2012CB932203 ; Strategic Priority Research Program of the Chinese Academy of Sciences(XDB22040503) ; 11472286 ; 2012CB937500) ; 11572328)
课题组名称LNM实验平台 ; LNM材料介观力学性能的表征
论文分区二类
力学所作者排名1
引用统计
被引频次:26[WOS]   [WOS记录]     [WOS相关记录]
文献类型期刊论文
条目标识符http://dspace.imech.ac.cn/handle/311007/60568
专题非线性力学国家重点实验室
通讯作者Yuan, FP (reprint author), Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech, 15,North 4th Ring,West Rd, Beijing 100190, Peoples R China.; Yuan, FP (reprint author), Univ Chinese Acad Sci, Sch Engn Sci, Beijing 100190, Peoples R China.
推荐引用方式
GB/T 7714
Wang W,Zhang HS,Yang MX,et al. Shock and spall behaviors of a high specific strength steel: Effects of impact stress and microstructure[J]. JOURNAL OF APPLIED PHYSICS,2017,121,13,.
APA Wang W.,张虎生.,杨沐鑫.,姜萍.,袁福平.,...&Yuan, FP .(2017).Shock and spall behaviors of a high specific strength steel: Effects of impact stress and microstructure.JOURNAL OF APPLIED PHYSICS,121(13).
MLA Wang W,et al."Shock and spall behaviors of a high specific strength steel: Effects of impact stress and microstructure".JOURNAL OF APPLIED PHYSICS 121.13(2017).
条目包含的文件 下载所有文件
文件名称/大小 文献类型 版本类型 开放类型 使用许可
JouAr-2017-052.pdf(2715KB)期刊论文作者接受稿开放获取CC BY-NC-SA浏览 下载
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
Lanfanshu学术
Lanfanshu学术中相似的文章
[Wang W]的文章
[张虎生]的文章
[杨沐鑫]的文章
百度学术
百度学术中相似的文章
[Wang W]的文章
[张虎生]的文章
[杨沐鑫]的文章
必应学术
必应学术中相似的文章
[Wang W]的文章
[张虎生]的文章
[杨沐鑫]的文章
相关权益政策
暂无数据
收藏/分享
文件名: JouAr-2017-052.pdf
格式: Adobe PDF
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。